1998 Fiscal Year Final Research Report Summary
A Basic Study on an Optimum Design of a High Permittivity Dielectric Disk Resonator in Milli-meter Wave Band Mobile Communication
Project/Area Number |
09650394
|
Research Category |
Grant-in-Aid for Scientific Research (C)
|
Allocation Type | Single-year Grants |
Section | 一般 |
Research Field |
情報通信工学
|
Research Institution | Utsunomiya University |
Principal Investigator |
TOMABECHI Yoshiro Utsunomiya University, Department of Education, Associate Professor, 教育学部, 助教授 (00008062)
|
Co-Investigator(Kenkyū-buntansha) |
MATSUBARA Mari Utsunomiya University, Department of Education, Lecturer, 教育学部, 講師 (90282376)
|
Project Period (FY) |
1997 – 1998
|
Keywords | mobile communications in millimeter wave band / high permittivity dielectric disk resonator / whispering gallery mode / resonance characteristics / high permittivity dielectric waveguide / propagation characteristics |
Research Abstract |
A subject of our research consists of 2 parts, namely 1 ; A study on resonance frequencies of a Whispering Gallery Mode on a high permittivity dielectric disk resonator, 2 ; A study on propagation characteristics of a high permittivity dielectric waveguide which has a rectangular cross section. 1) A study on resonance frequencies Introducing an approximate separation of variables method and a effective dielectric constant, we analyze resonance frequencies of the Whispering Gallery Mode on the resonator. As the result, it is found that our method improves results come from conventional methods very much. We also show experimentally electromagnetic field distribution near the disk to define a mode number of the Whispering Gallery Mode. In a near future, we will present a new analytical method derived by applied Point Matching Method. It is possible for us to obtain the resonance frequencies and an unloaded Q factor of the disk resonator at the same time. 2) A study on propagation characteristics As electromagnetic fields in a high permittivity dielectric waveguide tend to bend toward surrounding area, we take account of the all field components to obtain an propagation constant. First, we solve an eigenvalue equation derived from a continuity of main field components. We also consider a difference from the continuity in the secondary field components on the waveguide boundary. Next step of our analysis, we minimize the difference to select a correct the propagation constant. Our results show a good agreement with a previous numerical work. It is found that our simple analytical method gives us not only propagation constant but also well approximated field expression.
|