• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

1998 Fiscal Year Final Research Report Summary

Investigation on the Dripping Behavior of Primary Slag Melt in the Cohesive Zone of the Blast Furnace Through Iron or Oxide Funnel

Research Project

Project/Area Number 09650801
Research Category

Grant-in-Aid for Scientific Research (C)

Allocation TypeSingle-year Grants
Section一般
Research Field Metal making engineering
Research InstitutionTohoku University

Principal Investigator

NAGASAKA Tetsuya  Graduate School of Tohoku University, Associate Professor, 大学院・工学研究科, 助教授 (30180467)

Co-Investigator(Kenkyū-buntansha) HINO Mitsutaka  Graduate School of Tohoku University, Professor, 大学院・工学研究科, 教授 (10091729)
Project Period (FY) 1997 – 1998
Keywordsraw materials for ironmaking / slag / molten oxide / phase diagram of oxide / blast furnace operation / hold-up / surface tension / ironmaking technology
Research Abstract

Alumina content in the iron ore imported to Japan is increasing year by year and some problems for the blast furnace operation due to the use of the high alumina containing sinter are reported. Since all of iron ore used in Japanese iron making companies is imported from overseas such as Australia, Brazil and so on, the problems caused by the lower grade ore should be solved as soon as possible. Though the true mechanism of harmful effect of alumina on the blast furnace operation is not known up till now due to the very complex phenomena in the blast furnace, it is generally considered that the alumina in the sinter would act the important role mainly on the behavior of primary melt formed in the sinter during the reduction. Keeping such background in view, this study aims to clarify the mechanism of harmful effect of alumina on the blast furnace operation. The behavior of primary melt, which is formed in the sinter at the cohesive zone of the blast furnace has been simulated by dripping molten slag through iron or oxide funnel. The effects of basicity, A12O3 and Fe_tO_<>O contents in the five kinds of slags on the dripping temperature) and hold-up on the funnel have been discussed. It was found that the eutectic melt formed in the sinter would play important role for the dripping behavior of slag melt in the blast furnace or hold-up phenomenon of slag melt among fine pore in reduced iron and ore particle. Al_2O_<>increases the hold-up degree of the slag melt on the funnel and its effect becomes much significant in the acidic and low Fe_tO_<>O containing slag. It was estimated that the increase of the slag hold-up by Al_2O_<> in the ore could result in the harmful effect on the permeability resistance and indirect reduction rate of the sinter in the blast furnace.

  • Research Products

    (8 results)

All Other

All Publications (8 results)

  • [Publications] 勝間田晃稔: "鉄及び酸化物漏斗からの酸化鉄系融体の滴下実験" 材料とプロセス. 10巻4号. 739-742 (1997)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 勝間田晃稔: "鉄製漏斗からのFe_tO-CaO-SiO_2-Al_2O_3系融体の滴下挙動に及ぼすFe_tO濃度と塩基度の影響" 材料とプロセス. 11巻4号. 804- (1998)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] T.Nagasaka: "Simulation for Dripping Behavior of Primary Melt Formed during the Reduction of Iron Ore Sinter in the Blast Furnace" 1988 ICSTI/Ironmaking Conference Proceedings, The Iron and Steel Society. 57巻. 301-309 (1998)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] Mitsutaka Hino: "Simulation of Primary Slag Melting Behavior in the Cohesive Zone of Blast Furnace, Considering the Effect of Al_2O_3, Fe_tO and Basicity in the Sinter Ore" Metallurgical and Materials Transactions B. 30巻印刷中. (1999)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] A.Katsumata: ""Dripping Simulation of FeO Based Mlet through Iron or Oxide Funnel"" Current Advances in Materials and Processes. 10 (4). 739-742 (1997)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] A.Katsumata: ""Effect of Fe_tO and Basicity on the Dripping Behavior of Fe_tO-CaO-SiO_2-Al_2O_3 Mlet through Iron Funnel"" Current Advances in Materials and Processes. 11 (4). 804 (1997)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] T.Nagasaka: ""Simulation for Dripping Behavior of Primary Melt Formed during the Reduction of Iron Ore Sinter in the Blast Furnace"" 1998 ICSTI/Ironmaking Conference Proceedings, The Iron and Steel Society. 57. 301-309 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] M.Hino: ""Simulation of Primary Slag Melting Behavior in the Cohesive Zone of Blast Furnace, Considering the Effect of Al_2O_3, Fe_tO and Basicity in the Sinter Ore"" Metallurgical and Materials Transactions B. Vol.30B (in press). (1999)

    • Description
      「研究成果報告書概要(欧文)」より

URL: 

Published: 1999-12-08  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi