1999 Fiscal Year Final Research Report Summary
Realization of High-performance Materials Through Control of Mezoscopic Structure of Materials
| Project/Area Number |
10555031
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 展開研究 |
|---|
| Research Field |
Materials/Mechanics of materials
|
|---|
| Research Institution | Kobe University |
|---|
Principal Investigator |
TOMIMTA Yoshihiro Faculty of Engineering, Professor, 工学部, 教授 (10031147)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
ADACHI Taiji Faculty of Engineering, Associate Professor, 工学部, 助教授 (40243323)
NAKAI Yoshikazu Faculty of Engineering, Professor, 工学部, 教授 (90155656)
SHIBUTANI Youji Graduate School of Osaka University, Professor, 大学院・工学研究科, 教授 (70206150)
YASHIRO Kisaragi Faculty of Engineering, Research Associate, 工学部, 助手 (50311775)
|
|---|
| Project Period (FY) |
1998 – 1999
|
| Keywords | Strain Induced Phase Transformation / Mezoscopic Structure / Control of Material Structure / High-performance Materials / Computational Simulation / TRIP Steels / Martensitic Transformation / Mechanical Model |
|---|
| Research Abstract |
1.By means of precise tension tests conducted at the environmental temperatures of 77K to 373K, the constitutive equation that models for martensitic transformation depending on strain rate, temperature and applied stress system, was established.
2.The computational strategy for the prediction of the deformation behavior of TRIP steels was then developed using the established constitutive equation
3.Through comparison between the computationally predicted stress-strain relation for 77K and 293K, the validity of the proposed constitutive equation in predicting macroscopic nature of deformation behavior was verified. The local distribution of the martensitic phase over the ringed-notched specimen deformed under tension at 77K was predicted computationally and compared with the values obtained by a specially arranged experimental procedure using the micro-hardness testing device. The good correspondence between the two results confirms the validity of the present computational strategy.
4.A computational simulation of the deformation behavior of TRIP steel bars without/with the ringed notch under uniaxial tension at 77K was performed. The accuracy of the computational results was verified through the comparison against the experimental results.
5.A sort of inverse method was used to control the deformation processes to realize the improvement of the mechanical property of materials.
|
