1999 Fiscal Year Final Research Report Summary
Research on static and dynamic characteristics of the thermally induced levitation mechanism (TIL) using thermal creep flow.
| Project/Area Number |
10650057
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Applied physics, general
|
|---|
| Research Institution | Tottori University |
|---|
Principal Investigator |
FUKUI Shigehisa Tottori University, Faculty of Engineering, Professor, 工学部, 教授 (40273883)
|
|---|
| Project Period (FY) |
1998 – 1999
|
| Keywords | Molecular Gas Dynamics / Boltzmann Equation / Direct Simulation Monte Carlo / Thermal Creep Flow / Microtribology / Molecular Gas-film Lubrication / Nanotechnology / Micro Mechanism |
|---|
| Research Abstract |
This research estimates the static and dynamic characteristics of the micro levitation mechanism caused by thermal creep flow, which occurs only in regions where the Knudsen number defined as the ratio of the molecular mean free path and the characteristic length is not negligible, between two parallel plates with submicron spacings and temperature gradients. Linearization analysis method in frequency domain of the static and dynamic characteristics is established by the use of the molecular gas film lubrication equation(MGL equation) including thermal creep flow effects, which is a Reynolds-type gas bearing equation for arbitrarily small spacings. Static pressure distributions by the method are compared with those by the direct simulation Monte Carlo (DSMC) technique and are found to agree well with each other. Dynamic pressures, which consist of stiffness and damping characteristics, are also analyzed by the linearization method of the MGL equation. The results of this research are helpful in designing the thermally induced micro levitation mechanism.
|
Research Products
(4 results)
