• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2000 Fiscal Year Final Research Report Summary

IMPROVEMENT OF PROOF FATIGUE WITH GRADIENT OF MECHANICAL PROPERTIES OF SURFACE LAYER

Research Project

Project/Area Number 10650093
Research Category

Grant-in-Aid for Scientific Research (C)

Allocation TypeSingle-year Grants
Section一般
Research Field Materials/Mechanics of materials
Research InstitutionUNIVERSITY OF THE RYUKYUS

Principal Investigator

KANESHIRO Hideo  FACULTY OF ENGINEERING, UNIVERSITY OF THE RYUKYUS, PROFESSOR, 工学部, 教授 (40045000)

Co-Investigator(Kenkyū-buntansha) YAHUSO Tateki  FACULTY OF ENGINEERING, UNIVERSITY OF THE RYUKYUS, PROFESSOR, 工学部, 教授 (10045023)
MAKISHI Takashi  FACULTY OF ENGINEERING, UNIVERSITY OF THE RYUKYUS, ASSOCIATE PROFESSOR, 工学部, 助教授 (60219300)
Project Period (FY) 1998 – 2000
KeywordsSalt bath nitriding / Plasma nitriding / Hollow cathode method / Fatigue strength / Dislocation structures / Crack initiation / Fatigue fracture mechanism
Research Abstract

Salt bath nitriding or plasma nitriding were applied to structural steel SS400 and low carbon steel S15CK respectively, and those fatigue properties and fatigue fracture mechanisms were investigated. The results obtained are as follows :
(1) In the case of nitrided SS400, fatigue cracks are generated at the separated regions between the compound layer and the diffusion layer and propagate in the inner region of the diffusion region.
(2) It is found that Fatigue strength of the nitrided steel is affected by the internal structures within the materials before nitriding treatment.
(3) Dislocation structures before nitriding are reorganized by the nitriding treatment. Such structures are changed into cell structutes by the cyclic stress.
(4) In the case of the plasmanitrided S15CK, fatigue cracks are generated along the needlelike nitrides and propagate in the connection of the nitrides.
(6) It is found that the increase of the nitrogen content in the reaction gases and gas pressure are effective in the appropriate nitriding of the narrow gap. It is also found that the hollow cathode discharge are effective in the enhancement of the nitriding

  • Research Products

    (10 results)

All Other

All Publications (10 results)

  • [Publications] 兼城英夫: "窒化したSS400の疲労特性と転位組織"日本機械学会論文集(A編). 65巻. 808-815 (1999)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 真壁朝敏: "イオン窒化した低炭素鋼S15CKの疲労破壊機構"琉球大学工学部紀要. 1-6 (2000)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 兼城英夫: "窒化した圧延鋼の疲労特性と転位組織"日本機械学会論文集(A編). 67巻. 94-101 (2001)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 眞喜志隆: "すき間部のイオン窒化に及ぼす処理条件の影響"第46回熱処理技術協会講演概要集. 3-4 (1998)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 眞喜志隆: "ホローカソード放電を利用したイオン窒化の迅速化"第50回熱処理技術協会講演概要集. 25-26 (2000)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] H.Kaneshiro et al.: "Fatigue Properties and Dislocation Structures of Nitrided SS400"Trans.JSME. vol.65. 808-815 (1999)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] C.Makabe et al.: "Fatigue Fracture Mechanism of an Ion-nitrided Low Carbon Steel S15CK"Bulletin of the Faculty of Eng., University of the Ryukyus. 1-6 (2000)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] H.Kaneshiro et al.: "Fatigue Properties and Dislocation Structures of Nitrided Rolled Steel"Trans.JSME. vol.65. 94-101 (2001)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] T.Makishi et al.: "Effect of Nitriding Condition on Surface Hardening of Narrow Gap Nitriding"Proc.JSHT. 3-4 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] T.Makishi et al.: "Rapid Plasma Nitriding by Hollow Cathode Discharge"Proc.JSHT. 25-26 (2000)

    • Description
      「研究成果報告書概要(欧文)」より

URL: 

Published: 2002-03-26  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi