• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2000 Fiscal Year Final Research Report Summary

Development of analysis system to assess ultimate seismic behavior of steel piers accompanying fracture due to strain localization

Research Project

Project/Area Number 11650483
Research Category

Grant-in-Aid for Scientific Research (C)

Allocation TypeSingle-year Grants
Section一般
Research Field 構造工学・地震工学
Research InstitutionNagoya Institute of Technology

Principal Investigator

GOTO Yoshiaki  Nagoya Institute of Technology, Dept. of Civil Engineering, Professor, 工学部, 教授 (90144188)

Co-Investigator(Kenkyū-buntansha) OBATA Makoto  Nagoya Institute of Technology, Dept. of Civil Engineering, Associate Professor, 工学部, 助教授 (30194624)
Project Period (FY) 1999 – 2000
Keywordsplasticity / constitutive equation / ductile fracture / seismic design / large deformation
Research Abstract

The major damages observed for thin-walled steel piers in the Great Kobe Earthquake are the fracture as well as the local bucklins of plate elements. Since the Kobe Earthquake, intensive cyclic loading tests on steel piers have been carried out to examine the ductility deterioration due the local buckling of plate elements. Furthermore, it is shown that the ultimate local buckling behavior of steel piers under cyclic loading can be accurately analyzed by the geometrically and materially nonlinear FEM analysis based on shell elements if some adequate cyclic plasticity model is used for the constitutive relation of steel. In contrast, the fracture observed in the Kobe Earthquake did not similarly occur in the cyclic loading tests and, hence, it is still a controversial issue how and why this fracture happened. The only fact obtained by the detailed observation on the fractured section of the damaged steel piers is that the brittle fracture initiated from a small ductile fracture. This im … More plies that the occurrence of the small ductile fracture is a necessary requirement for the occurrence of the brittle fracture. Therefore, the investigation into the ductile fracture of steel piers will make it possible to explain the cause of the fracture observed in the Kobe Earthquake.
Herein, we present a numerical analysis method to predict the fracture of steel piers under cyclic loading and examine the applicability of this method by cyclic loading test on steel piers. In the analysis, the Gurson constitutive model is modified in order takes into account the cyclic behavior of steel and is implemented in the 3-dimentional solid element. The Gurson model is the most widely used plasticity model that can consider the nucleation and growth of micro voids closely related to the ductile fracture. In order to investigate the validity of the modified Gurson model, the initiation of ductile fracture is observed by conducting a cyclic loading test on thin-walled steel piers with circular cross section. From the comparison between the numerical analysis and the test results, it is shown that the locations of the ductile fracture in the steel piers can be qualitatively predicted by the modified Gurson model. However, regarding the deformation at the initiation of ductile cracks, some difference is observed between the analysis and the experiment. There still remains a difficult problem how to identify the initiation of the ductile cracks in experiment. This problem must be further examined in the future. Less

  • Research Products

    (6 results)

All Other

All Publications (6 results)

  • [Publications] 小畑,水谷,後藤: "鋼構造の延性破壊の有限要素法解析への導入に関する基礎的検討"土木学会論文集. 1-48. 185-196 (1999)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] Obata,Mizutani,Goto: "Numerical approach to the ductile fracture of steel members"Proc.ICASS'99. 2. 1021-1027 (1999)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] Obata,Matsuo,Goto: "Experimental study on strain localization and ductile fracture of steel-pipe due to cyclic horizontal loading"Proc.ICSCS'01. (掲載予定). (2001)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] M.Obata, A.Mizutani, Y.Goto: "The verification of plastic constitutive relation and its application to FEM analysis of plastic fracture of steel members"Proc. JSCE, I-48. 626. 185-196 (1999)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] M.Obata, A.Mizunita, Y.Goto: "Numerical approach to the ductile fracture of steel members"Proc. ICASS'99. 2. 1021-1027 (1999)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] M.Obata, N.Matsuo, Y.Goto: "Experimental study on strain localization and ductile fracture of steel-pipe due to cyclic horizontal loading"Proc. of ICSCS'01. (to appear). (2001)

    • Description
      「研究成果報告書概要(欧文)」より

URL: 

Published: 2002-03-26  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi