2000 Fiscal Year Final Research Report Summary
A DESIGN OF STIFFENING METHOD FOR EXSISTIG CYLINDRICAL STEELPIERS BY FUSE STRUCTURE
| Project/Area Number |
11650498
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
構造工学・地震工学
|
|---|
| Research Institution | TYOTA COLLEGE OF TECHNOLOGY |
|---|
Principal Investigator |
SAKURAI Takamasa CIVIL Eng., TYOTA COLLEGE OF TECHNOLOGY PROFESSOR, 環境都市工学科, 教授 (80024298)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
KAWANISHI Naoki CIVIL Eng., TYOTA COLLEGE OF TECHNOLOGY ASSISTANT PROFESSOR, 環境都市工学科, 助手 (60300589)
CHU Kazuo CIVIL Eng., TYOTA COLLEGE OF TECHNOLOGY ASSOCIATE PROFESSOR, 環境都市工学科, 助教授 (20141898)
|
|---|
| Project Period (FY) |
1999 – 2000
|
| Keywords | Experiment / Finite Displacement Analysis / Cylindrical Pier / Stiffening / Fuse Structure / Cyclic Loading / Stiffening / Existing Pier |
|---|
| Research Abstract |
A stiffening method for existing cylindrical steel piers is studied. In order to strengthen existing pier, fuse structure is used. The study is carried out by experimental and numerical analytical method.
In order to raise the ductility of piers, we need following point.
1. The horizontal strength of the pier must not be raised over 10% by the work.
2. Ductility of the pier needs to increase.
The stiffening method is carried out as following.
1. When big horizontal load act on the non-pier, local buckling occurs on the pier. The stiffening work is given around the buckling part. Rectangular steel plates are welded on it.
2. In order to prevent to raise the horizontal strength of the pier, a gap is set at the buckling part. The rectangular plates are not welded at the buckling part. We call the gap as fuse structure.
We can get the results that the horizontal strength raise below approximately 10% and the ductility raise as approximately 20% by the fuse structure.
|
Research Products
(6 results)
