2000 Fiscal Year Final Research Report Summary
Development of Mo Composite Material Coated High Corrsion Resistant Nitride under Severe Corrosion Enivronment
| Project/Area Number |
11793005
|
|---|
| Research Category |
Grant-in-Aid for University and Society Collaboration
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Material processing/treatments
|
|---|
| Research Institution | OKAYAMA UNIVERSITY |
|---|
Principal Investigator |
YOSHIO Tetsuo Faculty of Environmental Science and Technology, OKAYAMA UNIVERSITY Professor, 環境理工学部, 教授 (70032943)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
SAKATA Yusaku Faculty of Engineering, OKAYAMA UNIVERSITY Professor, 工学部, 教授 (70032951)
TAKADA Jun The Graduate School of Natural Science and Technology, OKAYAMA UNIVERSITY Professor, 大学院・自然科学研究科, 教授 (60093259)
NAGAE Masahiro Faculty of Environmental Science and Technology, Research Fellow of the Japan Society for the Promotion of Science, 環境理工学部, 日本学術振興会特別研究員
OKA Youichirou Yusan Engineering Co.Ltd., モールド製造課, 研究職
NISHIDA Norihide Industrial Technology Centor of Okayama Prefecture, 材料研究部, 専門研究員
|
|---|
| Project Period (FY) |
1999 – 2000
|
| Keywords | Molybdenum Alloy / Internal Nitriding / Precipitation Strengthening / Molybdenum Nitrides / Corrosion Resistance / Boiling Sulfuric Acid |
|---|
| Research Abstract |
For pure Mo and Mo-0.5 mass% alloy nitrided at 1073K to 1373K in NH_3 gas, the microstructural observations of molybdenum nitride layer were carried out through an optical and a transmission electron microscope and X-ray diffraction analysis. Corrosion behavior of the nitrided specimens was also examined. A surface nitriding layer consisted mainly of two Mo nitrides : an outer one of γ-Mo_2N and an inner one of β-Mo_2N.A great number of {011}<011>-type micro-twins were observed in the β3-Mo_2N layer whereas the microstructure of the γ-Mo_2N layer is almost free from lattice defects. The nitrided specimens exhibited excellent corrosion resistance even in 75wt% sulfuric acid solution at the boiling temperature of 460.8K compared with unnitrided specimens. Its corrosion rate decreased with decreasing nitriding time because of the suppression of cracking by decreasing thickness of the surface nitriding layer. The corrosion rate of the specimen nitrided at 1123K for 24h was less than 0.001 mm/y in boiling 75% sulfuric acid. In a nitrided Mo-0.5Ti alloy an internal nitriding layer with remarkably high harness of Hν-800 was formed beneath the surface nitriding layer. The high hardness is considered to be ascribed from fine dispersion of extremely small titanium nitride particles in the Mo matrix. The hardness in the internal nitriding layer gradually decreased as the distance from the interface increased.
|
