2002 Fiscal Year Final Research Report Summary
Evaluation of Welding Eigenstrain Characteristics and Its Application to the Bead Flush Method
| Project/Area Number |
12450044
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Materials/Mechanics of materials
|
|---|
| Research Institution | TOKYO INSTITUTE OF TECHNOLOGY |
|---|
Principal Investigator |
NAKAMURA Haruo Tokyo Institute of Technology, Graduate School of Information Science and Engineering, Professor, 大学院・情報理工学研究科, 教授 (40134829)
|
|---|
| Project Period (FY) |
2000 – 2002
|
| Keywords | Bead Flush Method / Eigen-Strain / Welding Residual Stresses / Reinforcement of Weld / Inverse Analysis / Welding Simulation |
|---|
| Research Abstract |
Measurement of welding residual stresses is one of important tasks to assess the structural integrity of welded structures. By now, the investigator has proposed a new nondestructive evaluation method of welding residual stresses called the bead flush method, and confirmed its utility for simple welded plates by numerical simulations and experiments. In this method, eigenstrains are determined by the inverse analysis using released strains measured during removing reinforcement of weld. And then residual stresses are calculated by simple FEM analyzes using eigenstrains determined above. For wider applicability and higher accuracy of this method, eigenstrain field should be determined accurately beforehand in the inverse analysis. Therefore, in this research, a concept how solution sets of eigenstrains are determined in the inverse analysis is proposed. Based on this concept, influencing factors of welding eigenstrains are investigated and relations between welding eigenstrains and residual stresses are made clear by the thermo-elasto-plastic analysis.
|
