2002 Fiscal Year Final Research Report Summary
Development of mechanical PCS for SMES
Project/Area Number |
12555078
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 展開研究 |
Research Field |
電力工学・電気機器工学
|
Research Institution | Kyushu University |
Principal Investigator |
SUEHIRO Junya Kyushu University, Faculty of Information Science and Electrical Engineering, Associate Professor, システム情報科学研究院, 助教授 (70206382)
|
Co-Investigator(Kenkyū-buntansha) |
TSUTSUMI Katsuya Kyushu University, Faculty of Information Science and Electrical Engineering, Research manager, 総合研究所, 主席研究員(研究職)
IMASAKA Kiminobu Kyushu University, Faculty of Information Science and Electrical Engineering, Research Associate, システム情報科学研究院, 助手 (40264072)
HARA Masanoari Kyushu University, Faculty of Information Science and Electrical Engineering, Professor, システム情報科学研究院, 教授 (30039127)
|
Project Period (FY) |
2000 – 2002
|
Keywords | Mechanical PCS / Quench / SMES / Subcooled liquid nitrogen / Quench time lag / Metallic particle |
Research Abstract |
(1) Quench of the mechanical PCS, which was energized by the lamp current, generated with a time delay after the instantaneous PCS current exceeded a static quenching current (the quench delay). (2) The quench delay was attributed to the time in which the temperature of the superconducting connection bridge became higher than the critical temperature due to the magnetic flux flow loss. (3) An optical observation system was developed in order to observe bubble behavior in the subcooled liquid nitrogen. It became clear the bubble collapsed within 1ms, which was much shorter than in pool boiling liquid nitrogen. (4) Bubble formation process in the presence of free conducting particle in liquid helium was investigated. Experimental results showed that a single bubble was always generated at the moment of particle collision with the electrode and bubble behavior depended strongly on the state of liquid helium.
|
Research Products
(6 results)