2001 Fiscal Year Final Research Report Summary
Establishment of quantitative evaluation method of atmosphere control electric kiln for pottery
| Project/Area Number |
12555080
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 展開研究 |
|---|
| Research Field |
電力工学・電気機器工学
|
|---|
| Research Institution | Kanazawa Technical College |
|---|
Principal Investigator |
NAOE Nobuyuki Electrical Eng. Associate professor, 電気工学科, 助教授 (00249781)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MINAMEDE Akiyuki Electrical Eng. Assistant professor, 電気工学科, 講師 (20259849)
TAKEMATA Kazuya kanazawa institution of Technology, Electrical Engineering, Assistant Professor, 工学部, 講師 (50167491)
YAMADA Hirofumi Mechanical Eng. Professor, 機械工学科, 教授 (20280381)
NAKAMA Minoru Tamada Industrial. Researcher, 電気窯事業部, 課員「研究職」
TAMADA Yoshiaki Tamada Industrial. Researcher, 社長「研究職」
|
|---|
| Project Period (FY) |
2000 – 2001
|
| Keywords | POTTERY / ELECTRIC KILN / COLOR |
|---|
| Research Abstract |
This research described the evaluation method of the electric kiln which was able to be baked by reduction. The evaluation method is a baking mechanism and a quantitative evaluation method.
The effectiveness of the proposal-baking pattern was confirmed by the baking experiment and the surface observation in this research period. Moreover, the colorimeter measured color values of the gas kiln and the decompression electricity kiln. The content of the research executed in the research period is concretely shown as follows.
1. Baking experiment in decompression electric kiln In the baking experiment of pottery, the test pieces and teacups were baked by the oxidation and reduction in the proposal-baking pattern. Baking was tried by various glazes. Consequently, the color on the surface of pottery obtained the result the same as the forecast.
2. Evaluation of color The color was evaluated by a colorimeter. Moreover, an engineer also evaluated the color.
3. Observation of surface of pottery The observation of the surface of pottery observed the surface of the test pieces with the multi focus microscope.
|
