2003 Fiscal Year Final Research Report Summary
Research on Analytical Method and Learning Method of Human Skill
| Project/Area Number |
13480114
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
社会システム工学
|
|---|
| Research Institution | Okayama University |
|---|
Principal Investigator |
OSAKI Hirokazu Faculty of Engineering, Okayama University, Department of System Engineering, Professor, 工学部, 教授 (60032942)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TOKUNAGA Syuuichi Takuma National College, Associate Professor, 助教授 (10197874)
MUNESAWA Yoshiomi Faculty of Engineering, Okayama University, Department of System Engineering, Assistant, 工学部, 助手 (70274008)
KAJIHARA Yasuhiro Faculty of Engineering, Okayama university, Department of System Engineering, Associate Professor, 工学部, 助教授 (70224409)
IWAMOTO Hidehisa Kure National College, Associate Professor, 助教授 (40232714)
|
|---|
| Project Period (FY) |
2001 – 2003
|
| Keywords | Human skill / Learning / Analytical method / 3 dimensional magnetic sensor / Bicyuu sacred dance mask / Skilled works in factory / cooking work / operation work |
|---|
| Research Abstract |
This study developed a method of analyzing a high degree of human skills for handing them down. For the analysis of skills, first of all, we developed a method of analyzing the movements of the parts of a human body, tools and targets at intervals of 0.07 seconds as well as a method of making an analysis of the characteristics of works in light of 3D shapes to a measurement precision of 0.1mm. Next, we analyzed the skills of a mask carver who has been carving masks for Bicchu kagura for more than 40 years under the methods developed by us. We also developed a training system that can instruct the movements of a cutting instrument of the mash carver. The system enabled anybody to experience a high level of the skills of the carver at any time and to evaluate the degree of his/her progress. In addition, after we analyzed skills to be used for home cooking and the operation of a general purpose machine tool (a lathe) at a factory, we developed a robot system for reproducing and reviewing the analyzed skills. Apart from the above, we analyzed a suturing process in surgical operations and developed a suturing robot and an arm rest that supports the upper arm of a doctor during an operation.
|
