2002 Fiscal Year Final Research Report Summary
Multifunctional laser-delivery system for all types of medical lasers
| Project/Area Number |
13555101
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 展開研究 |
|---|
| Research Field |
電子デバイス・機器工学
|
|---|
| Research Institution | Tohoku University |
|---|
Principal Investigator |
MIYAGI Mitsunobu Tohoku University Graduate School of Engineering, Professor, 大学院・工学研究科, 教授 (90006263)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
SHI Yi-Wei Tohoku University Graduate School of Engineering, Associate Professor, 大学院・工学研究科, 助教授 (90323063)
SHOUJI Shigeru Tohoku University Dental Hospital, Lecturer, 歯学部附属病院, 講師 (10142986)
MATSUURA Yuji Tohoku University Graduate School of Engineering, Associate Professor, 大学院・工学研究科, 助教授 (10241530)
HONGO Akihito Hitachi Cable Ltd., Optro-System Laboratory, Expert Researcher, オプトロシステム研究所, エキスパート
SAITO Seiichi Tohoku University Graduate School of Medicicine, Research Associate, 大学院・医学研究科, 助手 (80235043)
|
|---|
| Project Period (FY) |
2001 – 2002
|
| Keywords | Hollow fiber / YAG laser / Infrared fiber / Optical fiber / Laser medicine |
|---|
| Research Abstract |
We investigated hollow fibers and delivery system for medical applications. The system is applicable to all of CO2 lasers, CO lasers, Er:YAG lasers and Nd:YAG lasers having different ablation properties for human body. The fibers are so thin that they have high flexibility. Various output devices for hollow fibers are investigated for variety of medical uses. For dentistry, the devices are improved to make them highly functional. Output devices for urology are also designed and developed.
The following results were obtained in this research:
(1) Development of output devices based on hollow waveguides
For medical applications of hollow fibers, the output end should be sealed to keep moisture and ablated debris from the inside of the fibers. We developed some sealing techniques for hollow fibers. An easy and low-cost technique is to seal the end with a polymer film, By dipping the end to polymer solution and dry it to form a sealing film. For higher energy threshold, glass caps made of Pyrex and silica glass are developed. By changing the shape of the sealed end, the cap show focusing effect to give higher energy density at the focus spot. These sealed devices are applied to the both of dentistry and urological applications.
(2) Hollow fibers for CO2, CO, Er:YAG and excimer lasers and development of input and output devices for hollow fibers.
Hollow fibers which show low-loss properties for CO2, CO, Er:YAG and excimer lasers were developed. Output devices for the fibers which applicable to variety of medical applications were also developed. A sealing cap made of silica glass was tested in calculus fragmentation experiment and the result showed the high capability of the hollow fiber with the sealed devices.
|
-
-
-
-
-
-
-
-
-
-
-
[Publications] Y. Abe, K. Iwai, R. Toyooka, T. Katagiri, R. Kanamori, Y. Shi, Y. Matsuura, M. Miyagi, J. Oishi, Y. Okagami: "Improvement of Transmission Properties of Visible Pilot Beam for Hollow fibers Designed for CO2 Laser Delivery"Laser Original. vol.30, no.8. pp.472-474 (2002)
Description
「研究成果報告書概要(欧文)」より
-
