2017 Fiscal Year Final Research Report
Deformation Capacity of the Beam-Column subjected to Axial Force with Bending Moment
Project/Area Number |
15K06291
|
Research Category |
Grant-in-Aid for Scientific Research (C)
|
Allocation Type | Multi-year Fund |
Section | 一般 |
Research Field |
Building structures/Materials
|
Research Institution | Nagoya Institute of Technology |
Principal Investigator |
Sato Atsushi 名古屋工業大学, 工学(系)研究科(研究院), 准教授 (00362319)
|
Research Collaborator |
ONO Tetsuro 名古屋工業大学, 名誉教授
UANG Chia-Ming University of California, Professor
|
Project Period (FY) |
2015-04-01 – 2018-03-31
|
Keywords | H形鋼柱 / 最大曲げモーメント / 塑性変形能力 / 崩壊形式 / Pδモーメント / 軸力比 / 曲げ座屈細長比 / 材端曲げモーメント比 |
Outline of Final Research Achievements |
The H-shape column that is subjected to the compressive axial force with the bending moment was testing in this study. Additionally, a numerical simulation that is using finite element method was also conducted. The structural performance of the H-shape column was compared with the design rules that are stipulated in the recommendation published from AIJ. From the comparison study, it can be recognized that the current design rules provided conservative results on strength and ductility; the actual structural performance of the H-shape column is not used in the design. Finally, the design rules to evaluate the strength of the column was shown; the formulae that can evaluate the strength and ductility were proposed from the regression analysis of the test and numerical results.
|
Free Research Field |
建築構造
|