2006 Fiscal Year Final Research Report Summary
Visualization and Measurement on Nano Particle Multiphase Flow using Process Tomography
| Project/Area Number |
16560159
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Fluid engineering
|
|---|
| Research Institution | Nihon University |
|---|
Principal Investigator |
TAKEI Masahiro Nihon University, College of Science and Technology, Associate Professor, 理工学部, 助教授 (90277385)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
OCHI Mitsuaki Nihon University, College of Science and Technology, Professor, 理工学部, 教授 (80059914)
|
|---|
| Project Period (FY) |
2004 – 2006
|
| Keywords | CT / Process Tomography / Inadequacy inverse problem / CVSPM / Nano particle |
|---|
| Research Abstract |
The micro channels were manufactured experimentally with various MEMS devices at Micro Device Center in Funabashi Campus in 2004.
The developed things are : 1) a sensitivity map calculation for micro Process Tomography and 2) a cord of highly precise inverse problem analytical technique for micro PT in "software development of micro PT"
More precisely, (1) a recipe (a condition) of mask aligner and ICP etching device was discussed.
In addition, (2) an electrode placement to micro channel was produced and I mastered the know-how of micro-channel production and made a micro-electrode by MEMS technology with using sputtering.
Furthermore, (3) a measurement of flow impedance was performed and I applied an image reconfiguration cord with the results of a nano particle fluid and measured relations of a nano-particle and impedance in the micro-channel with electrode.
The visualization and measurement of nano-particle concentration distribution in micro-channel was performed.
|
