2005 Fiscal Year Final Research Report Summary
Optimization of shape and placement of superconducting junctions of SQUID by 2 dimensional scanning of external magnetic field
| Project/Area Number |
16560312
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Electron device/Electronic equipment
|
|---|
| Research Institution | Kanagawa University |
|---|
Principal Investigator |
NAKAYAMA Akiyoshi Kanagawa University, Electrical Engineering, professor, 工学部, 教授 (90183524)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
KYO Zuihou Kanagawa University, Electrical Engineering, professor, 工学部, 教授 (10078298)
ANADA Tetsuo Kanagawa University, Electrical Engineering, professor, 工学部, 教授 (20260987)
ABE Susumu Kanagawa University, Electrical Engineering, full-time lecturer, 工学部, 専任講師 (10333147)
|
|---|
| Project Period (FY) |
2004 – 2005
|
| Keywords | Josephson junctions / Superconducting devices / niobium junctions / Fraunhofer patterns / hexagonal symmetry / SQUID / Vertically stacked junctions |
|---|
| Research Abstract |
We have found hexagonal symmetry in the dependence of Josephson current of triangle shape junctions upon external magnetic field. Niobium/aluminum-oxide/niobium junctions are fabricated using magnetron sputtering of niobium and thermal oxidation of aluminum layers. Selective niobium anodization process has been used to define junction areas. In the case of square shaped junction, dependence of Josephson current obtained by two dimensional scanning of the external field parallel to aluminium-oxide layer, have become the product of the two Fraunhofer patterns in the direction H_x, H_y parallel to each edge of this square junction area. Sub peaks have been observed in four directions at 0,90,180 and 270 degree around the main peak in the centre of the (H_x,H_y) plane of the I_c-H(H_x,Hy) dependence. We have also fabricated triangle shaped junctions and obtained the magnetic field dependence of Josephson current, where sub peaks can be observed in six directions at 0,60,120,180 240 and 300
… More
degree around the centre of the (H_x,H_y) magnetic plane. This magnetic dependence has hexagonal symmetry. We also simulated the dependence assuming the uniform current flow in the junction area. The gauge-invariant-phase-difference between the two superconducting electrodes is modulated perpendicular to the external magnetic field direction inside the barrier region, where the modulation wavelength is inverse proportional to the magnitude of the applied magnetic field. Quite excellent agreement between the measured data and the simulation result has successfully been obtained.
We have also stack the junctions vertically and obtained the double barrier junctions, where the two junction barriers would affect each other. The strength of this interference of the two barriers can be changed by the separation of the two barriers. This separation was easily controlled by the thickness of the middle layer between the two barriers. By the shutter control, we have made lots of double barrier junctions having different thickness of middle layers simultaneously. Dependence of the gap voltage and Josephson superconducting current through the double barrier junctions upon the thickness of the middle layer have been studied. We have also study the two dimensional magnetic field dependence of this superconducting current and have evaluated the effective capturing area of the external magnetic field in this interfering structure. Less
|
Research Products
(8 results)
