2006 Fiscal Year Final Research Report Summary
Development of Measuring System for In Vitro Hemodynamics and Evaluation of Fluid Forces Acting on Blood Vessel Walls
| Project/Area Number |
17360077
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Fluid engineering
|
|---|
| Research Institution | Yokohama National University |
|---|
Principal Investigator |
NISHINO Koichi Yokohama National University, School of Engineering, Professor, 大学院工学研究院, 教授 (90192690)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
ISODA Haruo Hamamatsu University School of Medicine, Dept. Radiology, Associate Professor, 医学部, 助教授 (40223060)
|
|---|
| Project Period (FY) |
2005 – 2006
|
| Keywords | Hemodynamics / Wall Shear Stress / Flow Measurements / PIV / Pressure Measurement / Computational Fluid Dynamics / Index-Matching Technique |
|---|
| Research Abstract |
The present study has two main objectives. The first one is to develop a measuring system for fluid forces (i.e., pressure and shear stresses) acting on blood vessel walls and thus for pulsating characteristics of those fluid forces. The second one is to evaluate, by using the system developed, such fluid forces through in vitro experiment using aneurysm models made from MRI data taken from real patients. An additional objective is to conduct 3-D fluid flow computations using the MRI data in order to obtain information of fluid dynamic quantities unavailable from experiment The outcomes are as follows:
(1) Stereo PIV measurements based on the index-matching technique are carried out by using silicone-rubber models of cerebral aneurysm made from MRI data taken from real patients. Distributions of three-component mean velocities in multiple cross-sections in two aneurysm models, a ruptured model and an unruptured model, are measured at three steady velocity conditions.
(2) A method for evaluating, from three-component velocity distributions measured, the wall shear stresses acting on the aneurysm walls. Particular attention is paid to the interpolation scheme for velocities near the wall.
(3) The method is applied to the data taken in the stereo PIV measurements. The wall shear stresses are evaluated and the effect of the uncertainties in the wall position is examined.
(4) A method for 3-D computations for fluid flows in cerebral aneurysms using exported data from MRI models is studied. A commercially available CFD code is utilized and the inlet and outlet conditions appropriate from hemodynamics in cerebral aneurysm are determined.
(5) The CFD method is used to investigate both steady and pulsatile fluid flows in three different aneurysm models, a ruptured model, an unruptured model and a to-be-ruptured model. Velocity distributions, wall pressure distributions and wall shear stress distributions are clarified from the computed results.
|
Research Products
(8 results)
-
-
-
[Journal Article] Visualization of Hemodynamics in Silicon Intracranial Aneurysm Models with the Use of Stereoscopic Particle Image Velocimetry2006
Author(s)
Isoda, H., Nishino, K., Kosugi, T., Inagawa, S., Sakahara, H.
-
Journal Title
The 44th Annual Meeting of American Society of Neuroradiology (ASNR) 学会発表
Pages: San Diego, USA
Description
「研究成果報告書概要(和文)」より
-
-
-
-
-
