2006 Fiscal Year Final Research Report Summary
X-ray high temperature in-situ stress measurement of fiber or powder reinforced plastic materials
| Project/Area Number |
17560607
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Composite materials/Physical properties
|
|---|
| Research Institution | Kobe City College of Technology |
|---|
Principal Investigator |
NISHIDA Masayuki Kobe City College of Technology, Department of Mechanical engineering, Assistant Professor, 機械工学科, 助教授 (80332047)
|
|---|
| Project Period (FY) |
2005 – 2006
|
| Keywords | X-ray stress measurement / Transmission method / Fiber reinforced plastic material / High temperature in-situ measurement / Stress estimation |
|---|
| Research Abstract |
X-ray stress measurement with sin^2Ψ method is one of useful tools to detect residual stresses in manufactured products. In this study, the residual stresses in the tungsten fiber reinforced polyethylene composite were examined by X-ray stress measurement technique. The transmission diffraction method was employed in residual stress measurement of polyethylene matrix. The X-ray elastic constant of high density polyethylene (HDPE) which formed matrix of the composite was estimated before residual stress measurement. The results of sin^2Ψ diagram with transmission method show good linearity under the several tensile loading. After that the residual stresses in the composite were investigated for HDPE matrix phase. From the measurement results, the tensile residual stresses existed in fiber longitudinal direction and compressive ones in transverse direction for HDPE matrix.
|
