2009 Fiscal Year Final Research Report
Research on advanced progressive die forming for small batch production of medical forceps and their functional progresses
| Project/Area Number |
19560125
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Kanagawa University |
|---|
Principal Investigator |
AOKI Isamu Kanagawa University, 工学, 教授 (30011159)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
SASADA Masahiro 神奈川大学, 工学部, 准教授 (80333152)
|
|---|
| Project Period (FY) |
2007 – 2009
|
| Keywords | 順送金型成形 / 繰返し順送 / パイロットピン / 医用鉗子 |
|---|
| Research Abstract |
Die-mould technique for forming medical forceps is studied. Press forming technology, focusing a small batch production, miniaturization of die-mould and pilot pin system lead to high preciseness of the products, is investigated through experiments and analysis. In the study, a pair of gripper is part targeted as a typical component of the forceps. As the results, repetitive progressive die forming developed is applicable for the small batch production and miniaturization of die mould. Furthermore, behavior on pilot pin during forming is also clarified.
|
Research Products
(9 results)
