• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2008 Fiscal Year Final Research Report

Analysis of casting defect by CFD simulator and development of optimum control system for casting process

Research Project

  • PDF
Project/Area Number 19760519
Research Category

Grant-in-Aid for Young Scientists (B)

Allocation TypeSingle-year Grants
Research Field Metal making engineering
Research InstitutionGifu University

Principal Investigator

YANO Kenichi  Gifu University, 工学部, 准教授 (90314088)

Project Period (FY) 2007 – 2008
Keywords鋳造
Research Abstract

本研究では,CFD(数値流体力学)モデルを用いて,注湯動作から鋳込み,さらには鋳型搬送までの溶湯の湯流れ解析を行うことにより,一連の鋳造プロセスにおける鋳造欠陥の発生原因を追求し,鋳造欠陥発生の防止と製品品質向上を可能とする鋳造プロセスの最適制御システムを開発することを研究目的とし,研究開発を行った.
結果として,勢いよく流れた溶湯が砂型内の堰を破損させたり,鋳型静止時にはほとんど見られない凝固欠陥の発生確率を高くしている問題に対し, CFD(数値流体力学)モデルを用いた溶湯の湯流れ解析を行うことにより,これら鋳造欠陥の発生原因を明らかにした.さらに,開発した最適入力導出ソフトウェアおよび制御系設計ツールを利用し,鋳造欠陥発生の防止と製品品質向上を実現する鋳造プロセスの最適制御システムを開発した.

  • Research Products

    (14 results)

All 2008 2007

All Journal Article (7 results) (of which Peer Reviewed: 7 results) Presentation (6 results) Patent(Industrial Property Rights) (1 results)

  • [Journal Article] 空気巻き込み量を考慮したダイカストプランジャの最適速度制御2008

    • Author(s)
      矢野賢一,平光広太郎,福井貴宏,山本茂,西戸誠志,渡辺守,根本泰則
    • Journal Title

      鋳造工学 第80 巻,第7 号

      Pages: 418-423

    • Peer Reviewed
  • [Journal Article] 空気取り込み量を考慮した高速揺動撹拌制御2008

    • Author(s)
      矢野賢一,前田将宏
    • Journal Title

      化学工学会論文集 第34 巻,第4 号

      Pages: 424-431

    • Peer Reviewed
  • [Journal Article] Optimum Velocity Control of Die Casting Plunger Accounting for Air Entrapment and Shutting2008

    • Author(s)
      K.Yano, K.Hiramitsu, Y.Kuriyama and S.Nishido
    • Journal Title

      International Journal of Automation Technology Vol. 2,No. 4

      Pages: 259-265

    • Peer Reviewed
  • [Journal Article] Analysis of Air Entrainment in the Die Casting Process and its Reduction by Plunger Velocity Control2008

    • Author(s)
      K.Yano, K.Hiramitsu and S.Nishido
    • Journal Title

      International Foundry Research Vol. 60, No. 3

      Pages: 8-13

    • Peer Reviewed
  • [Journal Article] Velocity Control of Die-casting Plunger Considering Air Entrainment2008

    • Author(s)
      K.Yano, K.Hiramitsu, T.Fukui, S.Yamamoto and S.Nishido
    • Journal Title

      Proc. Of World Foundry Congress

      Pages: 75-79

    • Peer Reviewed
  • [Journal Article] Optimum Design of Die Casting Plunger Tip Considering Air Entrainment2008

    • Author(s)
      K.Yoshimura, K.Yano, T.Fukui, S.Yamamoto, S.Nishido, M.Watanabe and Y.Nemoto
    • Journal Title

      Proc. Of Asian Foundry Congress

      Pages: 455-460

    • Peer Reviewed
  • [Journal Article] Fast Shake Mixing Control with Low Air Entrainment2007

    • Author(s)
      M.Maeda and K.Yano
    • Journal Title

      Proc. Of IFAC'08

      Pages: 2045-2050

    • Peer Reviewed
  • [Presentation] ダイカストの品質向上を目的とした多段階射出速度制御2008

    • Author(s)
      栗山嘉文,矢野賢一,西戸誠志
    • Organizer
      第153 回日本鋳造工学会全国講演大会講演概要集
    • Place of Presentation
      金沢
    • Year and Date
      20081024-27
  • [Presentation] 流体解析シミュレータを援用した繰り返し学習制御による注湯制御入力の導出2008

    • Author(s)
      鈴木優介,矢野賢一,日出勝利
    • Organizer
      第153 回日本鋳造工学会全国講演大会講演概要集
    • Place of Presentation
      金沢
    • Year and Date
      20081024-27
  • [Presentation] 撹拌プロセスにおける空気取り込み量低減化制御2008

    • Author(s)
      前田将宏,矢野賢一
    • Organizer
      撹拌プロセスにおける空気取り込み量低減化制御
    • Place of Presentation
      長野
    • Year and Date
      20080605-07
  • [Presentation] 流体解析シミュレータ援用によるダイカストプランジャ多段階最適速度入力の導出2008

    • Author(s)
      矢野賢一
    • Organizer
      第152 回日本鋳造工学会全国講演大会講演概要集
    • Place of Presentation
      名古屋
    • Year and Date
      20080523-26
  • [Presentation] 空気巻き込みを考慮したプランジャチップ形状の最適化2008

    • Author(s)
      吉村高行,矢野賢一,西戸誠志,渡辺守
    • Organizer
      第152 回日本鋳造工学会全国講演大会講演概要集
    • Place of Presentation
      名古屋
    • Year and Date
      20080523-26
  • [Presentation] ダイカストプランジャ速度最適化による空気巻き込み量の低減化2007

    • Author(s)
      平光広太郎,矢野賢一,福井貴宏,山本茂,西戸誠志,渡辺守,根本泰則
    • Organizer
      第150 回日本鋳造工学会全国講演大会講演概要集
    • Place of Presentation
      仙台
    • Year and Date
      20071019-22
  • [Patent(Industrial Property Rights)] 金属成形用シリンダ装置および金属成形用プランジャチップ2008

    • Inventor(s)
      西戸誠志,福井貴弘,矢野賢一,吉村高行
    • Industrial Property Rights Holder
      アイシン高丘株式会社,岐阜大学
    • Industrial Property Number
      特願,2008-109963
    • Filing Date
      2008-04-21

URL: 

Published: 2010-06-10   Modified: 2016-04-21  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi