• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2021 Fiscal Year Annual Research Report

Three-dimensional profile reconstruction of a natural SCC colony through electromagnetic NDT methods

Research Project

Project/Area Number 19F19045
Research InstitutionTohoku University

Principal Investigator

遊佐 訓孝  東北大学, 工学研究科, 教授 (60466779)

Co-Investigator(Kenkyū-buntansha) GE JIUHAO  東北大学, 工学(系)研究科(研究院), 外国人特別研究員
Project Period (FY) 2019-07-24 – 2022-03-31
KeywordsSCC colony / inversion problem / rotating eddy currents
Outline of Annual Research Achievements

1) Obtained the three-dimensional profile of stress corrosion crack colonies through the proposed inversion problem algorithm. We found that heuristic learning algorithms such as genetic algorithm and ant colony algorithm were not effective in depth sizing inversion problem using the signal of eddy current testing. Through simulation method, we confirmed that employing three dimensional magnetic signals did not improve the depth sizing accuracy.
2) Studied the detection of crack colonies using uniform and rotating eddy current testing techniques in high speed. The simulation and experiment results indicate that uniform and rotating eddy current testing were less sensitive to speed than traditional eddy current testing.
3) Compared the performance of uniform and rotating eddy current techniques through probability of detection analysis. Moreover, the mechanism of rotating eddy current was studied further. The results indicated that rotating eddy current testing is not always better than uniform eddy current testing. The orientation of eddy current should be selected.
4) The proposed algorithm for transforming the results of rotating eddy current testing to ones of uniform eddy current testing was tested on ferromagnetic material. The results indicated that the algorithm is also effective. When detecting ferromagnetic material, we can separate the magnetic signals of disturbed eddy current and magnetic flux leakage.
5) Finished the whole work in Japan and submitted finial report to JSPS.

Research Progress Status

令和3年度が最終年度であるため、記入しない。

Strategy for Future Research Activity

令和3年度が最終年度であるため、記入しない。

  • Research Products

    (4 results)

All 2022 2021

All Journal Article (3 results) (of which Int'l Joint Research: 1 results,  Peer Reviewed: 2 results,  Open Access: 1 results) Presentation (1 results)

  • [Journal Article] Transformation of the rotating eddy current testing signal at the desired eddy current orientation2022

    • Author(s)
      Ge Jiuhao、Yang Chenkai、Yu Fanwei、Yusa Noritaka
    • Journal Title

      NDT & E International

      Volume: 125 Pages: 102551~102551

    • DOI

      10.1016/j.ndteint.2021.102551

    • Peer Reviewed
  • [Journal Article] Whether “Rich in Frequency” Means “Rich in Information” in Pulsed Eddy Current Testing to Evaluate Plate Thickness: Numerical Investigation2022

    • Author(s)
      Yusa Noritaka、Ge Jiuhao、Fan Mengbao
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 63 Pages: 529~537

    • DOI

      10.2320/matertrans.MT-I2021001

    • Open Access / Int'l Joint Research
  • [Journal Article] Inspection of Pitting Corrosions on Weld Overlay Cladding Using Uniform and Rotating Eddy Current Testing2021

    • Author(s)
      Ge Jiuhao、Yu Fanwei、Tomizawa Takuma、Song Haicheng、Yusa Noritaka
    • Journal Title

      IEEE Transactions on Instrumentation and Measurement

      Volume: 70 Pages: 1~10

    • DOI

      10.1109/TIM.2021.3108521

    • Peer Reviewed
  • [Presentation] Comparison between detection capabilities of uniform and rotating eddy current testing against pitting on stainless steel weld cladding using a probabilistic analysis2021

    • Author(s)
      Fanwei Yu, Jiuhao Ge, Haicheng Song, Takuma Tomizawa, Noritaka Yusa
    • Organizer
      日本非破壊検査協会東北支部講演会

URL: 

Published: 2022-12-28  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi