2010 Fiscal Year Final Research Report
Improvement of selective laser sintering in part resolution using
| Project/Area Number |
20246032
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (A)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | The University of Tokyo |
|---|
Principal Investigator |
NIINO Toshiki 東京大学, 生産技術研究所, 准教授 (70291929)
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Keywords | 積層造形 / Additive Manufacturing / ラピッドプロトタイピング / 粉末焼結積層造形 組織工学 / 担体 |
|---|
| Research Abstract |
A laser sintering apparatus equipped with an optic system that can focus its beam in a spot one third diameter as small as typical commercially available. As a result, a vertical wall of 180μm in thickness and a slit of 300μm in gap were successfully built. Relationship between the beam diameter and fineness of obtained structure is investigated. The minimum wall thickness that maintains sufficient mechanical strength was obtained as 0. 6mm. To improve the resolution of tissue engineering scaffold, plastic sacrificial filler was tested.
|
Research Products
(16 results)
