2010 Fiscal Year Final Research Report
Development of seismic design for reinforced concrete beam-column joint based on mechanical model
| Project/Area Number |
20360248
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Building structures/materials
|
|---|
| Research Institution | The University of Tokyo |
|---|
Principal Investigator |
SHIOHARA Hitoshi The University of Tokyo, 大学院・工学系研究科, 准教授 (50272365)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
KUSUHARA Fumio 東京大学, 大学院・工学系研究科, 助教 (50361522)
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Keywords | コンクリート構造 |
|---|
| Research Abstract |
It is discovered that reinforced concrete beam-column joints failure is inevitable and lateral capacity and ductility of the structure are inferior to what expected by current design codes, provided that the column-to-beam strength ratio is in the range of from 1.0 to 1.5, which has been common range in design and construction practice for reinforced concrete building structure. It is also found that the increase in joint shear capacity margin and concrete strength can not alter the beam-column joint performance. This is significantly contrary to the established knowledge to date for four decades on seismic design of reinforced concrete structure. It is proved theoretically by a new mechanical model and experimentally by comprehensive series of seismic tests of beam-column joint specimens with wide variety of design parameters. Based on the fact discovered, a safer, more reliable and more rational seismic design method has been proposed.
|
