2010 Fiscal Year Final Research Report
Applied the ink-jet printing method to the adhesive spreading.
| Project/Area Number |
20580179
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Wood science
|
|---|
| Research Institution | Akita Prefectural University |
|---|
Principal Investigator |
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Keywords | 接着 / 木質材料 / 塗布制御 / インクジェット法 / 微量塗布 |
|---|
| Research Abstract |
We investigate that the ink-jet method that is a common method in computer printing was applied to the adhesive spreading in wood-based materials. As the small amount of phenol-formaldehyde resin, 5g/m2, 1/20 to 1/10 of conventional process, was uniformly spread on the bond surface area of the specimens with ink-jet method, the specimens were obtained the fully bond strength to make the conventional wood-based materials.
|
