2010 Fiscal Year Final Research Report
Reaction synthesis of aluminum nitride in precision mold without sintering agents
| Project/Area Number |
20613005
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Element strategy
|
|---|
| Research Institution | Nagoya University |
|---|
Principal Investigator |
KOBASHI Makoto Nagoya University, 大学院・工学研究科, 准教授 (90225483)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
KUME Yuji 名古屋大学, 大学院・工学研究科, 助教 (30377890)
KANETAKE Naoyuki 名古屋大学, 大学院・工学研究科, 教授 (00115552)
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Keywords | 複合材料 / 窒化アルミニウム / in situ反応 / 無加圧浸透法 / 反応浸透法 / 低温合成 |
|---|
| Research Abstract |
The reactive infiltration of molten aluminum into a powder preform was investigated as a processing route for aluminum nitride (AlN). As the powder preform, titanium and boron nitride (BN) powders were blended and compacted. The infiltration occurred spontaneously at temperatures above 1173 K, and turned out to be irrelevant to the BN powder size and BN/Ti blending ratio. However, the conversion ratio of BN to AlN was prominent above 1673K. When the amount of aluminum is not sufficient, residual BN was observed in the microstructure, and the morphology of the mold was not copied precisely. The specimen containing rich aluminum showed the good transcriptional behavior.
|
Research Products
(5 results)
