2009 Fiscal Year Final Research Report
Developing of friction stir welding process of high nitrogen containing stainless steel
| Project/Area Number |
20860019
|
|---|
| Research Category |
Grant-in-Aid for Young Scientists (Start-up)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Akita University |
|---|
Principal Investigator |
MIYANO Yasuyuki Akita University, 教育文化学部, 講師 (60466589)
|
|---|
| Project Period (FY) |
2008 – 2009
|
| Keywords | 高窒素鋼 / 摩擦攪拌接合 / Niフリー / 継手 / クロム窒化物 |
|---|
| Research Abstract |
Butt welding of high nitrogen-containing austenitic stainless steels (HNS) plates was successfully performed using a load-controlled FSW machine. In order to assess the range of the optimum FSW conditions, several welding parameter were adopted. Full-penetrated and defect-free butt welded joints were successfully produced. The stir zone showed a higher Vickers hardness than the base metal. The yield strength and the tensile strength of the welds exceeded those of the base metal. The relationship of mechanical properties of joints and effect of heat input, experimentally acquired peak heat temperature, was examined. The grain size in the stir zone and the phase constituents in the stir zone center were analyzed by OIM (Orientation Imaging Microscopy).
|
-
-
-
-
-
-
[Presentation] Friction Stir Welding of High Nitrogen-containing Austen itic Stainless Steel2009
Author(s)
Miyano, Y., Fujii, H., Sun, Y., Katada, Y., Ieko, K., Kamiya, O.
Organizer
HNS2009
Place of Presentation
Russia, Moscow
Year and Date
2009-07-07
-
-
-
-
-
