2011 Fiscal Year Final Research Report
Micro Milling of Sapphire
| Project/Area Number |
21560130
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Tokyo Denki University |
|---|
Principal Investigator |
|
|---|
| Project Period (FY) |
2009 – 2011
|
| Keywords | サファイア / 切削 / エンドミル / 硬脆材料 / 脆性損傷 / 溶着 |
|---|
| Research Abstract |
Micro cutting of sapphire is studied to manufacture micro devices used in special environments at extremely high pressures and/or temperatures. Because sapphire is a hexagonal crystal material, the cutting force and the critical cutting depth, the maximum depth in which crack-free surfaces are finished, depends on the crystal plane and the cutting direction with respect to the crystal axis. In milling of sapphire, brittle fracture and adhesion of the surface finish should be considered in determination of the cutting conditions. The adhesion of material is reduced by the decomposed process, in which the cutting depth is given incrementally.
|
Research Products
(3 results)
