2011 Fiscal Year Final Research Report
Strain analysis of bulk metallic glasses using high energy X-ray microbeam scattering
| Project/Area Number |
21656166
|
|---|
| Research Category |
Grant-in-Aid for Challenging Exploratory Research
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Composite materials/Physical properties
|
|---|
| Research Institution | Kyoto University |
|---|
Principal Investigator |
OCHIAI Shojiro 京都大学, 大学院・工学研究科, 教授 (30111925)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
OKUDA Hiroshi 京都大学, 大学院・工学研究科, 准教授 (50214060)
|
|---|
| Project Period (FY) |
2009 – 2011
|
| Keywords | 高エネルギーX線回折 / 微小ビーム形成 / Zr基金属ガラス / ひずみ解析 / 構造不均一性 |
|---|
| Research Abstract |
Strain in as cast/annealed Zr-based bulk metallic glass beams and ingots has been examined by examining peak shift of the first halo using high energy X-rays with the energy of 113 keV. Strain distribution inside the ZrCuAl cast samples and annealed beams remained within the experimental error, which is exmined by measuring artificially bent beams used for Charpy test before measurements. Present results suggested that the heterogeneity of residual strains observed by high energy X-ray is well below the elastic limit, within experimenta error of the present measurements, and the origin of diveristy of Charpy impact test results should be explained by nanoscopic heterogeneity, which is now under way with high energy SAXS.
|
Research Products
(6 results)
