2012 Fiscal Year Final Research Report
Construction of Combined System of Machining and Measuring processes for Free-Form Surface of Polystyrene Foam usingsimplification procedure in CG Technology.
| Project/Area Number |
22360058
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Tokyo Institute of Technology |
|---|
Principal Investigator |
SAITO Yoshio 東京工業大学, 大学院・理工学研究科, 教授 (00108218)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TANAKA Tomohisa 東京工業大学, 理工学研究科, 准教授 (70334513)
ZHU Jiang 東京工業大学, 理工学研究科, 助教 (70509330)
|
|---|
| Project Period (FY) |
2010 – 2012
|
| Keywords | 生産システム / 自由曲面加工 / 三次元形状計測 / 画像簡略化 / 多軸制御 |
|---|
| Research Abstract |
Increasing a usage of 3D free-form surface, it is necessary to confirm an accuracy of machined surface compared with designed one. However, it is difficult to investigate a difference between them due to huge of data for free-form surface and time consuming of measurement. Therefore, machining and measuring processes must be combined to produce a free-form surface. Applying simplification procedure in CG field, new machining system with measuring process for free-form surface of polystyrene foam was proposed and significant information was obtained as a result.
|
