2012 Fiscal Year Final Research Report
The Visualization for the Surface Transcription Process DuringInjection Molding
| Project/Area Number |
22560122
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Kanazawa Institute of Technology |
|---|
Principal Investigator |
|
|---|
| Project Period (FY) |
2010 – 2012
|
| Keywords | 成形加工 / 射出成形 / 転写性 |
|---|
| Research Abstract |
The mechanism was clarified by visualizing resin inflow into a detailed portion about the surface transfer nature of the product in injection molding using glass-fiber reinforced resin and unreinforced resin, and the forming factor of the sake on a transfer disposition was found out. As a result, even if transfer nature was formerly the worsened glass-fiber reinforced resin, it turned out that unreinforced resin is excelled depending on some conditions. Raising the surface quality of an injection-molded product by leaps and bounds is expected by this.
|
