2012 Fiscal Year Final Research Report
Development of "Fluid Temperature Scanner" (Adaptive Response Compensation and Image Motion Measurement of In-Line Fine-Wire-Thermocouple Probe)
| Project/Area Number |
22560194
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Thermal engineering
|
|---|
| Research Institution | Nagoya Institute of Technology |
|---|
Principal Investigator |
TAGAWA Masato 名古屋工業大学, 工学研究科, 教授 (80163335)
|
|---|
| Project Period (FY) |
2010 – 2012
|
| Keywords | 温度計測 / センサ / 流体温度 / 可視化計測 / 適応応答補償 / 細線熱電対 / 応答遅れ / 時定数 |
|---|
| Research Abstract |
A novel measurement technique for visualizing the spatial temperature distribution of a non-isothermal gas flow has been developed. By tracking the movement path of a specifically-developed multi-sensor temperature probe using a commercially-available high-speed CCD camera, we can measure quantitatively a two-dimensional temperature profile and project it to the measurement object image obtained by the CCD camera. The key technique is an adaptive response-compensation scheme based on a "two-thermocouple probe technique," by which the response lag of the temperature sensors can be adequately compensated; hence the temperature profile can be reconstructed accurately. As an example, we have demonstrated that the temperature field of the hot-air jet ejected from a hair dryer can be visualized readily and quantitatively. The results show the effectiveness and usefulness of the proposed visualization technique.
|
