2012 Fiscal Year Final Research Report
Fabrication of InSb-based high-speed and low power devices on Si by using surface reconstruction controlled epitaxy
| Project/Area Number |
22560323
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Electron device/Electronic equipment
|
|---|
| Research Institution | University of Toyama |
|---|
Principal Investigator |
MORI Masayuki 富山大学, 大学院・理工学研究部, 准教授 (90303213)
|
|---|
| Co-Investigator(Renkei-kenkyūsha) |
MAEZAWA Koichi 富山大学, 大学院・理工学研究部, 教授 (90301217)
|
|---|
| Project Period (FY) |
2010 – 2012
|
| Keywords | InSb / 表面再構成制御成長法 / ALD / quasi-pseudomorphic QW-MOSFETs |
|---|
| Research Abstract |
InSb has attracted much interest for application of ultra-fast and low power devices. To realize the InSb-based FET, we prepared the quasi-pseudomorphic quantum well MOSFETs, in which the thin InSb layer was grown on Si（111) substrate by using surface reconstruction controlled epitaxy,, and 10- 30nm-thick Al2O3 layer was deposited on the InSb layer. As the results, our quasi-pseudomorphic QW-MOFET device with 15nm-thick InSb layer, gate length of 5μm and gate width of 40μm showed high transconductance of 63mS/mm.
|
Research Products
(36 results)
