2012 Fiscal Year Final Research Report
A study on evaluation for residual axial force of corroded high strength bolts
| Project/Area Number |
22560483
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Structural engineering/Earthquake engineering/Maintenance management engineering
|
|---|
| Research Institution | University of the Ryukyus |
|---|
Principal Investigator |
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
ARIZUMI Yasunori 琉球大学, 工学部, 教授 (90109306)
|
|---|
| Co-Investigator(Renkei-kenkyūsha) |
MURAKOSHI Jun 独立行政法人土木研究所, 構造物メンテナンス研究センター, 上席研究員 (60355881)
|
|---|
| Project Period (FY) |
2010 – 2012
|
| Keywords | 腐食 / 高力ボルト / 残存軸力 / 鋼橋 / 維持管理 |
|---|
| Research Abstract |
The residual axial force of corroded high strength bolts has been investigated. The corroded high strength bolts cut out from a collapsed steel girder bridge were classified from the viewpoints of shape and thickness reduction of nut. The results showed that the residual axial force seems to be affected by the shape, in addition to the thickness reduction. It was analytically indicated that the decrease in an axial force by the thickness reduction is caused by the local deformation of nut edge and hole ci rcumference of splice plate. Moreover, it was revealed that the measurement of the thickness reduct ion near the washer can evaluate the residual axial force.
|
