2022 Fiscal Year Annual Research Report
Development of Al-CNT with high strength and electrical conductivity by using low oxygen powder metallurgy process
| Project/Area Number |
22J15888
|
|---|
| Allocation Type | Single-year Grants |
|---|
| Research Institution | Nagoya University |
|---|
Principal Investigator |
KIM Dasom 名古屋大学, 工学研究科, 特別研究員(DC2)
|
|---|
| Project Period (FY) |
2022-04-22 – 2024-03-31
|
| Keywords | Carbon nanotube / Powder metallurgy / Al nanopower / Oxide-less interface / Al4C3 |
|---|
| Outline of Annual Research Achievements |
Al-carbon nanotube(CNT) composites with high mechanical and electrical properties were fabricated by solving (1) Exquisite interfacial control and (2) uniform dispersion of CNTs in Al matrix using low oxygen powder metallurgy process. By using bare Al nanopowder, first, the agglomeration of CNTs was improved and the dispersibility of CNTs was enhanced within the Al matrix. Second, oxide-less Al/Al and Al/CNT interfaces were prepared. oxide-less Al/Al interfaces contributed to preserving the electrical conductivity of Al. On the other hand, very fine Al4C3 were formed at Al/CNT interfaces with oxide-less layer by heat-treatment at much lower temperature. The uniformly dispersed fine Al4C3 particles enhanced the strength of the Al-CNTs composites without degrade of electrical conductivity of Al.
|
| Research Progress Status |
翌年度、交付申請を辞退するため、記入しない。
|
| Strategy for Future Research Activity |
翌年度、交付申請を辞退するため、記入しない。
|
Research Products
(2 results)
