2013 Fiscal Year Final Research Report
Development of Time-series Laser Imaging Techniques of Lean Premixed Flame in a Cylindrical Tube with Swirling Flow and Investigation of Flame Propagation Characteristics
| Project/Area Number |
23360100
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Thermal engineering
|
|---|
| Research Institution | Osaka University |
|---|
Principal Investigator |
KOMIYAMA Masaharu 大阪大学, 工学(系)研究科(研究院), 准教授 (40178372)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TAKEISHI Kenichiro 大阪大学, 基礎工学研究科, 教授 (70379113)
ODA Yutaka 大阪大学, 工学研究科, 講師 (50403150)
|
|---|
| Project Period (FY) |
2011-11-18 – 2014-03-31
|
| Keywords | 予混合火炎 / 旋回流 / 円管内 / PIV / 火炎伝播 |
|---|
| Research Abstract |
In this study, we developed simultaneous visualizing techniques of lean premixed flame and flow fields in a cylinder glass by high-speed PIV measurement. We present characteristics of flame propagation in a premixed burner with swirling flow in order to investigate unsteady flame behavior in the premixer. Two kinds of mixture gas supply techniques were used in order to investigate the characteristics of flame propagation. In the premixer of the closed center swirler with swirling flow, the tip of the flame was highly stretched and received flame extinction and the flame propagation further upward was prevented. In the premixer of the open center swirler, it was confirmed that flame was pressed back to downstream of the premixer by the axial high velocity region generated by impingement flow from center hole of the swirler.
|
Research Products
(9 results)
