• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2013 Fiscal Year Annual Research Report

セルフリーデバイスの開発と体内バイオプロセスに基づくもう一つの再生医療技術の確立

Research Project

Project/Area Number 23360374
Research InstitutionNational Cardiovascular Center Research Institute

Principal Investigator

中山 泰秀  独立行政法人国立循環器病研究センター, 研究所, 室長 (50250262)

Co-Investigator(Kenkyū-buntansha) 武輪 能明  独立行政法人国立循環器病研究センター, 研究所, 室長 (20332405)
上地 正実  日本大学, 生物資源科学部, 教授 (90296426)
神田 圭一  京都府立医科大学, 医学(系)研究科(研究院), 講師 (60295649)
渡辺 太治  京都府立医科大学, 医学部附属病院, 研究員 (20448723)
Project Period (FY) 2011-04-01 – 2014-03-31
Keywords再生医療 / 生体内組織工学 / バイオプロセス / バイオリアクター / セルフリーデバイス
Research Abstract

研究1)セルフリーデバイスの完成系の開発:心臓弁など内部に複雑な3次元形状を有する場合には外周にできた結合組織から内部に埋め込まれた基材を取り除くことは困難である。そこで、結合組織内部から基材を分解しながら取出せることができる組立式心臓弁作製用基材の作製を行った。ヤギの皮下に埋め込み、2ヵ月経過した時点で摘出し、形成した弁組織を破損することなく内部基材を取り除くことができた。
研究2)生体外機能の評価:これまでに生体組織体の機能評価を行うために生体の生理条件を模擬できる拍動流回路を設計している。ハイスピードカメラによって心臓弁の開閉状態の観察を行い、良好な稼働性を認めた。また、連続的に流量を計測することで、10日以上に渡って動脈環境下において弁の機能が維持できることを示すことができた。
研究3)動物移植実験によるバイオプロセスの有効性の評価:昨年度に引き続いて、ビーグル犬の肺動脈弁位置換とヤギの大動脈系への移植を行った。ヤギへの移植には、心尖ー大動脈バイパス術による方法で行った。共に月単位で生体内機能が維持されていることを超音波検査によって確かめることができた。また、併行して管状組織体に関しては、内径1mmの超小口径をラット腹部に移植し、3mmの小口径をウサギ頚部に移植し、5mmの中口径をビーグルの頚部に移植を行った。研究期間内には年単位の結果は間に合わなかったが、現在移植は継続中であり、経過観察を続ける予定である。

Current Status of Research Progress
Reason

25年度が最終年度であるため、記入しない。

Strategy for Future Research Activity

25年度が最終年度であるため、記入しない。

  • Research Products

    (18 results)

All 2014 2013

All Journal Article (6 results) (of which Peer Reviewed: 6 results) Presentation (5 results) (of which Invited: 1 results) Book (2 results) Patent(Industrial Property Rights) (5 results) (of which Overseas: 2 results)

  • [Journal Article] In vitro evaluation of a novel autologous aortic valve (Biovalve) with a pulsatile circulation circuit2014

    • Author(s)
      Sumikura H, Nakayama Y, Ohmuma K, Takewa Y, Tastumi E
    • Journal Title

      Artif Organs

      Volume: (in press)

    • DOI

      10.1111/aor.12173

    • Peer Reviewed
  • [Journal Article] Acceleration of robust “biotube” vascular graft fabrication bu in-body tissue architecture technology using a novel eosin Y-releasing mold2014

    • Author(s)
      Nakayama Y, Tsujinaka T
    • Journal Title

      J Biomed Mater Res B Appl Biomater

      Volume: 102B Pages: 231-238

    • DOI

      10.1002/jbm.b.32999

    • Peer Reviewed
  • [Journal Article] Preparation of an autologous heart valve with a stent (stent-biovalve) using the stent eversion method2014

    • Author(s)
      Mizuno T, Takewa Y, Sumikura H, Ohnuma K, Moriwaki T, Yamanami M, Oie T, Tatsumi E, Uechi M, Nakayama Y
    • Journal Title

      J Biomed Mater Res B Appl Biomater

    • DOI

      10.1002/jbm.b.33086

    • Peer Reviewed
  • [Journal Article] In-body tissue^engineered aortic valve (Biovalve type VII) architecture based on 3D printer molding2014

    • Author(s)
      Nakayama Y, Takewa Y, Sumikura H, Tamanami M, Matsui Y, Oie T, Kishimoto Y, Arakawa M, Ohnuma K, Kanda K, Tastumi E
    • Journal Title

      J Biomed Mater Res B Appl Biomater

    • DOI

      10.1002/jbm.b.33186

    • Peer Reviewed
  • [Journal Article] In vivo evaluation of an in-body, tissue-engineered, completely autologous valved conduit (biovalve type VI) as an aortic valve in a goat model2013

    • Author(s)
      Takewa Y, Yamanami M, Kishimoto Y, Arakawa M, Kanda K, Matsui Y, Oie T, Ishibashi-Ueda H, Tajikawa T, Ohba K, Yaku H, Taenaka Y, Tatsumi E, Nakayama Y
    • Journal Title

      J Artif Organs

      Volume: 25 Pages: 176-184

    • DOI

      10.1007/s10047-012-0679-8

    • Peer Reviewed
  • [Journal Article] The effect of electrically charged polyion complex nanoparticle-coated surfaces on adipose-derived stromal progenitor cell behaviour2013

    • Author(s)
      Iwai R, Nemoto Y, Nakayama Y
    • Journal Title

      Biomaterials

      Volume: 34 Pages: 9096-9102

    • DOI

      10.1016/j.biomaterials.2013.08.027

    • Peer Reviewed
  • [Presentation] In body tissue-engineered heart valve (biovalve) architecture based on 3D printer molding2013

    • Author(s)
      Y. Nakayama, Y. Takewa, M. Uechi, K. Kanda, T. Tajikawa, T. Oie
    • Organizer
      American Heart Association (AHA) 2013
    • Place of Presentation
      アメリカ、ダラス
    • Year and Date
      20131116-20131120
  • [Presentation] 3Dプリンターの再生医療での活用2013

    • Author(s)
      中山泰秀
    • Organizer
      第39回高分子学会中国四国支部高分子講座
    • Place of Presentation
      広島大学
    • Year and Date
      20131105-20131105
    • Invited
  • [Presentation] Can human buotubes be used as artificial vascular grafts?2013

    • Author(s)
      Y. Nakayama. Y. Takewa, T. Kaneko, M. Yamanami, T. Mizuno, H. Kawajiri, N. Okumura, S. Hanada, K. Kanda, E. Tatsumi
    • Organizer
      European Society for Artificial Organs Conference 2013
    • Place of Presentation
      イギリス、グラスゴー
    • Year and Date
      20130911-20130914
  • [Presentation] Rapid in vivo maturation of BIOTUBE vascular grafts by giant drops patching of adipose-derived stromal cells (ADSCs)2013

    • Author(s)
      R. Iwai, M. Yamanami, Y. Nemoto, Y. Nakayama
    • Organizer
      European Society of Cardiology Congress (ESC) 2013
    • Place of Presentation
      オランダ、アムステルダム
    • Year and Date
      20130831-20130904
  • [Presentation] Systemic application of a completely autologous aortic valved conduit (BIOVALVE Type VII) prepared bu in body tissue architecture technology in a goat model2013

    • Author(s)
      Y. Nakayama, Y. Takewa, H. Sumikura, M. Yamanami, K. Ohnuma, K. Kanda, E. Tatsumi
    • Organizer
      The Society for Heart Valve Disease, 7th Biennial Congress
    • Place of Presentation
      イタリア、ベニス
    • Year and Date
      20130622-20130625
  • [Book] 体内埋め込み医療材料の開発とその理想的な性能:デザインの要件2013

    • Author(s)
      中山泰秀, 武輪能明
    • Total Pages
      4
    • Publisher
      技術情報協会
  • [Book] O plus E2013

    • Author(s)
      中山泰秀
    • Total Pages
      7
    • Publisher
      アドコム・メディア
  • [Patent(Industrial Property Rights)] 人工弁, 人工弁形成用基材, 及び人工弁の生産方法2013

    • Inventor(s)
      中山泰秀, 大家智憲
    • Industrial Property Rights Holder
      国立循環器病研究センター
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      特願2013-171869
    • Filing Date
      2013-08-22
  • [Patent(Industrial Property Rights)] 人工弁, 人工弁形成用基材, 及び人工弁の生産方法2013

    • Inventor(s)
      中山泰秀, 上地正実, 大家智憲
    • Industrial Property Rights Holder
      国立循環器病研究センター
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      特願2013-173158
    • Filing Date
      2013-08-23
  • [Patent(Industrial Property Rights)] 結合組織体形成用基材, 及び結合組織体の生産方法2013

    • Inventor(s)
      中山泰秀, 大家智憲
    • Industrial Property Rights Holder
      国立循環器病研究センター
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      特願2013-178919
    • Filing Date
      2013-08-30
  • [Patent(Industrial Property Rights)] 移植用人工組織体製造用鋳型基材2013

    • Inventor(s)
      中山泰秀, 岩井良輔, 大家智憲
    • Industrial Property Rights Holder
      国立循環器病研究センター
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      PCT/JP2013/064082
    • Filing Date
      2013-05-21
    • Overseas
  • [Patent(Industrial Property Rights)] 膜状結合組織体形成用基材及びこれを用いた膜状結合組織体の生産方法2013

    • Inventor(s)
      中山泰秀, 大家智憲
    • Industrial Property Rights Holder
      国立循環器病研究センター
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      PCT/JP2013/064999
    • Filing Date
      2013-07-11
    • Overseas

URL: 

Published: 2015-05-28  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi