2013 Fiscal Year Final Research Report
Modeling and consideration on electrostatic-structural-fluid coupled vibration of MEMS structure
| Project/Area Number |
23560263
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Dynamics/Control
|
|---|
| Research Institution | Kyushu Institute of Technology |
|---|
Principal Investigator |
HORIE Tomoyoshi 九州工業大学, 情報工学研究院, 教授 (40229224)
|
|---|
| Co-Investigator(Renkei-kenkyūsha) |
NIHO Tomoya 九州工業大学, 大学院情報工学研究院, 助教 (60295011)
ISHIHARA Daisuke 九州工業大学, 大学院情報工学研究院, 准教授 (80363399)
|
|---|
| Project Period (FY) |
2011 – 2013
|
| Keywords | 静電気力－構造－流体連成現象 / ３連成現象効果 / MEMS / 連成解析 |
|---|
| Research Abstract |
To clarify the characteristics of coupled mechanical vibration behavior among electric field, deformation and fluid for a cantilever micro beam structure, an electrostatic-structural-fluid coupled finite element analysis code was developed. By considering the influence of governing parameters on the coupled phenomenon, the validity of the coupled model was verified. Micro cantilever beams were fabricated for the vibration experiment, non-linear coupled effect of which was observed in the vacuum environment. Comparing the vibration characteristics in the air with those obtained by the three phenomenon coupled analysis, the pull in characteristics change was shown due to the coupled effect.
|
Research Products
(11 results)
