2013 Fiscal Year Final Research Report
Development of Automatic Control System in Plasma-MIG Hybrid Welding
| Project/Area Number |
23560862
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Material processing/treatments
|
|---|
| Research Institution | Saitama University |
|---|
Principal Investigator |
YAMANE Satoshi 埼玉大学, 理工学研究科, 准教授 (10191363)
|
|---|
| Project Period (FY) |
2011 – 2013
|
| Keywords | プラズマ溶接 / MIG溶接 / ロボット / CCDカメラ / 溶滴移行 / アーク安定化 |
|---|
| Research Abstract |
The deep penetration can be obtained in plasma welding under inert shielding gas. The good mechanical property can be obtained due to the inert shielding gas, too. But efficiency of the welding is not good. On the other hand, a high efficiency of the welding was achieved by using MIG welding. The arc in MIG welding becomes unstable. In order to improve the arc stability, the hybrid welding system by using plasma and MIG welding was developed. The control circuit was made to synchronize the plasma welding with the MIG welding. Arc phenomena were analyzed by using the circuit and by taking with high speed video camera. The conditions for set up and welding were specified.
|
Research Products
(18 results)
