• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2014 Fiscal Year Final Research Report

Manufacturing technology of thin veneer multiple laminated materials with small amount spreading system of adhesive

Research Project

  • PDF
Project/Area Number 23580232
Research Category

Grant-in-Aid for Scientific Research (C)

Allocation TypeMulti-year Fund
Section一般
Research Field Wood science
Research InstitutionAkita Prefectural University

Principal Investigator

YAMAUCHI Hidefumi  秋田県立大学, 木材高度加工研究所, 准教授 (90279513)

Project Period (FY) 2011-04-28 – 2015-03-31
Keywords微量塗布技術 / 薄単板木質積層材料 / 薄物・多層 / 接着剤 / 合板 / LVL
Outline of Final Research Achievements

Manufacturing technology of thin veneer multiple laminated materials with small amount spreading system of adhesive were investigated.
The micro multiple laminated materials made with Sugi veneers of 0.3mm thickness and phenol formaldehyde resin of 6g/m2 spreading rate had 2mm thickness and 0.4g/cm3 specific gravity. The mechanical properties of the materials with orthogonal laminate were as same as commercial Sugi plywood. The modulus of rapture of the materials was improved up to 100MPa by oriented laminating. As more practical technology, such as the new type small amount spreading system of adhesive and the manufacture technique like pre-impregnation technique to call "Prepreg" has been developed.

Free Research Field

木質材料学および木質材料加工学

URL: 

Published: 2016-06-03  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi