2014 Fiscal Year Final Research Report
Development of plastic forming method using pulse laser induced vibration
| Project/Area Number |
24560136
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Ehime University |
|---|
Principal Investigator |
|
|---|
| Co-Investigator(Renkei-kenkyūsha) |
ZHU Xha 愛媛大学, 理工学研究科, 助教 (90325358)
MATSUSHITA Masafumi 愛媛大学, 理工学研究科, 助教 (90432799)
|
|---|
| Project Period (FY) |
2012-04-01 – 2015-03-31
|
| Keywords | 超音波 / 塑性加工 / Blaha効果 / レーザー |
|---|
| Outline of Final Research Achievements |
Plastic forming induced by bubble cavitation which was generated by laser pulse was tested in detailed conditions. However, the reduction behaviors of yield stress and work-hardening weren't expressed. Stress reduction behaviors clearly expressed in plastic forming induced ultrasonic vibration. In order to transmit efficiently ultrasonic vibration into the material, the shape of the compression jig was changed. As the results the stress reduction rate rose. Its highest reduction rate was 45 degree of slip direction. To observe crystal orientation in several compression conditions including ultrasonic vibration, X-ray diffraction was performed. When giving the supersonic from plastic region, the grain-size was approaching that of virgin material. On the other hand, when giving the supersonic from elastic region, the grain-size approached normal compression without the supersonics.
|
| Free Research Field |
材料強度
|
