2014 Fiscal Year Final Research Report
New damage limit criteria of steel-concrete composite members which can correspond to various required performance
Project/Area Number |
24560694
|
Research Category |
Grant-in-Aid for Scientific Research (C)
|
Allocation Type | Multi-year Fund |
Section | 一般 |
Research Field |
Building structures/materials
|
Research Institution | The University of Kitakyushu |
Principal Investigator |
KIDO Masae 北九州市立大学, 国際環境工学部, 准教授 (10453226)
|
Co-Investigator(Kenkyū-buntansha) |
TSUDA Keigo 北九州市立大学, 国際環境工学部, 教授 (50112305)
|
Project Period (FY) |
2012-04-01 – 2015-03-31
|
Keywords | 鋼・コンクリート合成構造 / 性能設計 |
Outline of Final Research Achievements |
Experimental study of square CFT columns subjected to axial load and cyclic lateral load was carried out. Test specimens were square CFT column with normal strength steel tube (STKR 400) and high strength steel tube (H-SA700). Test parameters are axial load ratio (ratio of the axial force to the compressive strength), the presence or absence of infilled concrete. Limit rotational angles are shown obtained by the test results. Local buckling limit angle of the CFT column with high strength steel tube obtained by the test results and past experimental studies were compared with those of the CFT column with normal strength steel tube. Local buckling limit angle of the circular CFT column with high strength steel tube are greater than those of the CFT column with normal strength steel tube. However, when the cross section is square, local buckling limit angle of the CFT column with high strength steel tube are not always greater than those of the CFT column with normal strength steel tube.
|
Free Research Field |
建築構造
|