• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2013 Fiscal Year Final Research Report

Development of partial modification technology of structures based on visualization of the solid phase flow phenomenon

Research Project

  • PDF
Project/Area Number 24656443
Research Category

Grant-in-Aid for Challenging Exploratory Research

Allocation TypeSingle-year Grants
Research Field Material processing/treatments
Research InstitutionOsaka University

Principal Investigator

FUJII Hidetoshi  大阪大学, 接合科学研究所, 教授 (00247230)

Co-Investigator(Kenkyū-buntansha) MORISADA Yoshiaki  大阪大学, 接合科学研究所, 特任講師 (00416356)
Project Period (FY) 2012-04-01 – 2014-03-31
Keywords摩擦攪拌接合 / 三次元可視化 / 部分改質 / 析出強化 / 変態 / X線
Research Abstract

A new technology in which the characteristics of a part of a structure are significantly improved by one process, has been developed. In this method, the properties are improved at any place for any materials in a very short period. After manufacturing a large-sized structure using a material with a sufficient formability, arbitrary places can be strengthened with this technique to maintain the mechanical properties of the whole structure.
For "stirring-dispersion", the three-dimensional solid phase flow visualization system has been developed using two X radiation sources in order to directly observe the flow in aluminum and ferrous alloys. Thereby, the defect formation mechanism was clarified and the process was optimized.

  • Research Products

    (24 results)

All 2014 2013 2012 Other

All Journal Article (5 results) (of which Peer Reviewed: 1 results) Presentation (18 results) (of which Invited: 1 results) Remarks (1 results)

  • [Journal Article] 高輝度X 線透過システムを用いた摩擦攪拌接合における欠陥形成機構の解明2014

    • Author(s)
      森貞好昭、今泉卓也、藤井英俊
    • Journal Title

      溶接学会論文集

      Volume: Vol.32 Pages: 31-37

    • URL

      http://jweld.jp/quarterly/new-quarterly.html

    • Peer Reviewed
  • [Journal Article] Surface Hardening of Ferritic Graphite Cast Iron by Friction Stir Processing2013

    • Author(s)
      K. Imagawa, H. Fujii, Y. Morisada, T. Hashimoto, Y. Yamaguchi and S. Kiguchi
    • Journal Title

      Materials Transactions

      Volume: Vol.54 Pages: 1938-1943

    • DOI

      10.23.20/matertrans.F-M2013818

  • [Journal Article] 吉川暢宏その場生成した、CuAl_2 を分散させたポーラスAl コア充填パイプ複合部材の創製2013

    • Author(s)
      田島敏宣,半谷禎彦,斎藤雅樹,小山真司,藤井英俊,孫 玉峰,森貞好昭,桑水流理
    • Journal Title

      日本機械学会論文集 A 編

      Volume: Vol.79 Pages: 1071-1075

  • [Journal Article] 摩擦攪拌現象を用いたインプロセス組織制御によるマクロヘテロ構造体化技術2013

    • Author(s)
      藤井英俊
    • Journal Title

      ふぇらむ(日本鉄鋼協会会誌)

      Volume: Vol.17 Pages: 763-768

    • URL

      https://www.isij.or.jp/journal/ferrum/?action=common_download_main&upload_id=502

  • [Journal Article] Three-Dimensional Visualization of Metallic Flow and Control of FSW Joint Properties Using New FSP Technique2013

    • Author(s)
      H. Fujii, Y. Morisada, T. Imaizumi
    • Volume
      Vol.7
    • Pages
      279-288
  • [Presentation] Friction Stir Welding of Steel2014

    • Author(s)
      H.Fujii
    • Organizer
      Seminar at FEFU
    • Place of Presentation
      Vladivostok, Russia
    • Year and Date
      20140327-28
    • Invited
  • [Presentation] Analysis of Metallic Flow during Friction Stir Welding by Three-Dimensional Visualization Using Two Pairs of X-ray Transmission System2014

    • Author(s)
      H.Fujii
    • Organizer
      The 3rd International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing
    • Place of Presentation
      Nantes, France(基調講演)
    • Year and Date
      20140130-31
  • [Presentation] Three Dimensional Visualization of Metallic Flow to Understand Defect Formation Mechanism during Friction Stir Welding2013

    • Author(s)
      H.Fujii, Y.Moisada and T.Imaizumi
    • Organizer
      Steel and Aluminum, Thermec'2013
    • Place of Presentation
      Las Vegas, USA(基調講演)
    • Year and Date
      20131202-06
  • [Presentation] Local Alloying between Cu and Zn by Friction Stir Processing2013

    • Author(s)
      M.Ueda, M.Ikeda, Y.Morisada and H.Fujii
    • Organizer
      Int. Joint Symp. On Joining and Welding
    • Place of Presentation
      Osaka, Japan
    • Year and Date
      20131106-08
  • [Presentation] Ferrite Alloy-Based Surface Composites Produced by Friction Stir Processing2013

    • Author(s)
      Y.Kimoto, T. Nagaoka, H.Watanabe, M.Fukusumi, Y.Morisada and H.Fujii
    • Organizer
      Materials Science & Technology 2013 Conf. & Exhibition
    • Place of Presentation
      Cananda
    • Year and Date
      20131027-31
  • [Presentation] 反応性および非反応性粒子の添加を伴うステンレス鋼への摩擦攪拌プロセス2013

    • Author(s)
      木元慶久、長岡亨、渡邉博之、福角真男、森貞好昭、藤井英俊
    • Organizer
      (一社)溶接学会平成25年度秋季全国大会
    • Place of Presentation
      岡山
    • Year and Date
      20130902-04
  • [Presentation] 鋳鉄の摩擦攪拌プロセス2013

    • Author(s)
      森貞好昭、今川浩一、藤井英俊
    • Organizer
      (一社)溶接学会平成25年度秋季全国大会
    • Place of Presentation
      岡山
    • Year and Date
      20130902-04
  • [Presentation] 高輝度X 線透過装置を用いた摩擦攪拌接合時の流動解析2013

    • Author(s)
      今泉拓也、森貞好昭、上路林太郎、藤井英俊
    • Organizer
      (一社)溶接学会平成25年度秋季全国大会
    • Place of Presentation
      岡山
    • Year and Date
      20130902-04
  • [Presentation] 摩擦攪拌粉末プロセス(FSPP)による継手の高機能化2013

    • Author(s)
      藤井英俊
    • Organizer
      軽金属学会第124回春季大会
    • Place of Presentation
      富山(基調講演)
    • Year and Date
      20130518-19
  • [Presentation] 高輝度X 線透過装置による低炭素鋼塑性流動挙動の三次元可視化2013

    • Author(s)
      今泉拓也、森貞好昭、藤井英俊、池田倫正、松下宗生
    • Organizer
      (一社)溶接学会平成25年度春季全国大会
    • Place of Presentation
      東京
    • Year and Date
      20130417-19
  • [Presentation] Understanding Defect Formation echanism during Friction Stir Welding by Three-dimensional Visualization of Material Flow2012

    • Author(s)
      Y.Morisada, .Imaizumi and H.Fujii
    • Organizer
      The Int. Symp. on Visualization in Joining & Welding Science through Adv. Measurements and Simulation
    • Place of Presentation
      Osaka
    • Year and Date
      20121128-30
  • [Presentation] Friction Stir Welding of High Temperature Materials and Visualization of Flow2012

    • Author(s)
      H.Fujii
    • Organizer
      2nd Int. Sym. Friction Stir Welding in China
    • Place of Presentation
      Beijing, China (基調講演)
    • Year and Date
      20121018-19
  • [Presentation] 高輝度塑性流動の三次元可視化による摩擦攪拌接合部欠陥形成メカニズムの解明2012

    • Author(s)
      今泉拓也、森貞好昭、藤井英俊
    • Organizer
      (一社)溶接学会平成24年度秋季全国大会
    • Place of Presentation
      奈良
    • Year and Date
      20120926-28
  • [Presentation] Partial Surface Hardening of Low Carbon Steel by Friction Stir Powder Processing2012

    • Author(s)
      K.Imagawa, Y.Morisada and H.Fujii
    • Organizer
      9th Int.Symp. FSW
    • Place of Presentation
      Huntssville, USA
    • Year and Date
      20120515-17
  • [Presentation] Three-dimensional Visualization of Material Flow in FSW by X-ray Radiography2012

    • Author(s)
      Y. Morisada, H. Fujii, Y. Kawahito, K. Nakata and M. Tanaka
    • Organizer
      9th Int. Symp. FSW
    • Place of Presentation
      Huntssville, USA
    • Year and Date
      20120515-17
  • [Presentation] 表面硬化層の形成に及ぼす摩擦攪拌粉末プロセス(FSPP)条件の影響2012

    • Author(s)
      今川浩一、藤井英俊、森貞好昭
    • Organizer
      (一社)溶接学会平成24年度春季全国大会
    • Place of Presentation
      東京
    • Year and Date
      20120410-12
  • [Presentation] 摩擦攪拌接合中の塑性流動の可視化と摩擦攪拌粉末プロセス(FSPP)による継手の高機能化2012

    • Author(s)
      藤井英俊
    • Organizer
      大阪大学接合研東京セミナー
    • Place of Presentation
      東京
    • Year and Date
      2012-12-05
  • [Presentation] 摩擦攪拌接合部の塑性流動三次元可視化による欠陥形成メカニズムの解明2012

    • Author(s)
      今泉拓也、森貞好昭、藤井英俊
    • Organizer
      スマートプロセス学会秋季総合学術講演会
    • Place of Presentation
      大阪
    • Year and Date
      2012-11-14
  • [Remarks]

    • URL

      http://www.jwri.osaka-u.ac.jp/~dpt9/

URL: 

Published: 2015-06-25  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi