2013 Fiscal Year Final Research Report
Development of the intelligent grinding system for a long workpiece
| Project/Area Number |
24860044
|
|---|
| Research Category |
Grant-in-Aid for Research Activity Start-up
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Okayama University |
|---|
Principal Investigator |
ONISHI Takashi 岡山大学, 自然科学研究科, 助教 (90630830)
|
|---|
| Project Period (FY) |
2012-08-31 – 2014-03-31
|
| Keywords | 円筒トラバース研削 / 長尺工作物 / 形状誤差 / 研削抵抗 / 形状精度 / 研削機構 / 誤差要因 / トラバース速度 |
|---|
| Research Abstract |
The purpose of this study is to improve the shape accuracy of a long workpiece in cylindrical traverse grinding. It is difficult to grind a long workpiece due to its elastic deformation caused by grinding force. In this study, the error cause of shape accuracy was investigated and new control method of the grinding machine was verified experimentally. As a result, it is found that the shape error of ground workpiece can be estimated easily with measuring the grinding force applied during grinding process. Furthermore, the shape error can be decrease by half successfully with controlling the traverse speed to keep the elastic deformation of the workpiece constant.
|
