2015 Fiscal Year Final Research Report
Development of a form measuring device for machined planar surface by multi point method
Project/Area Number |
25420057
|
Research Category |
Grant-in-Aid for Scientific Research (C)
|
Allocation Type | Multi-year Fund |
Section | 一般 |
Research Field |
Production engineering/Processing studies
|
Research Institution | Kyushu Institute of Technology |
Principal Investigator |
Shimizu Hiroki 九州工業大学, 大学院工学研究院, 准教授 (50323043)
|
Co-Investigator(Kenkyū-buntansha) |
TAMARU YUUMA 九州工業大学, 大学院工学研究院, 助教 (30284590)
|
Co-Investigator(Renkei-kenkyūsha) |
SAKAMOTO KENJI 九州工業大学, マイクロ化総合技術センター, 准教授 (10379290)
|
Research Collaborator |
TAKEUCHI SHUUZOU 北九州学術推進機構(FAIS), 半導体技術センター, 主任研究員
|
Project Period (FY) |
2013-04-01 – 2016-03-31
|
Keywords | 形状測定 / 平面度 / 真直度 / MEMS / 多点法 |
Outline of Final Research Achievements |
Multi sensor devices which measure displacement of three of five points simultaneously were designed for realizing on-machine measurement of machined planar surface with high accuracy. A total process was developed to fabricate this large scale micro electro mechanical systems (MEMS) device. By using this process, prototypes of proposed devices were manufactured. In addition, a data processing code for reconstructing a planar shape by connecting straightness data acquired by a multi sensor device was programmed. Furthermore, property of accumulated error in a planar form measurement was calculated by Monte Carlo method.
|
Free Research Field |
計測工学
|