• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

2017 Fiscal Year Annual Research Report

Intelligent Manufacturing Science of Innovative Composite Structures Based on Optical-Fiber Life Cycle Monitoring

Research Project

Project/Area Number 26220912
Research InstitutionThe University of Tokyo

Principal Investigator

武田 展雄  東京大学, 大学院新領域創成科学研究科, 教授 (10171646)

Co-Investigator(Kenkyū-buntansha) 水谷 忠均  国立研究開発法人宇宙航空研究開発機構, 研究開発部門, 主任研究開発員 (00401232)
水口 周  東京大学, 大学院新領域創成科学研究科, 特任准教授 (70512359)
Project Period (FY) 2014-05-30 – 2019-03-31
Keywords複合材料 / 光ファイバセンサ / モニタリング / 成形 / 硬化 / 成形モデリング
Outline of Annual Research Achievements

炭素繊維強化プラスチック(Carbon Fiber Reinforced Plastic、以下CFRP)は、航空機構造の軽量化を図るため、主要な一次構造部材にもCFRPが適用されてきており、かつ日本の製造技術が多く用いられている。しかし、いまだ成形・組立などの製造上の問題および損傷後強度保証の難しさがあり、従来金属製航空機と比較して製造コストが高くまた十分な軽量化にも至っていない。
本研究では、ライフサイクルモニタリングによる構造高信頼化技術と,製造技術に課題はあるものの低コスト・高機能性のポテンシャルを有する新規CFRP製造プロセスを融合させる「複合材構造の知的ものづくり科学」を構築することで初めて可能になる、革新CFRP 構造コンセプトを世界に先駆けて提案・実証することを目的としている。
[1]光ファイバ援用成形中その場物性評価基盤技術、[2]低圧成形CFRP、[3]熱可塑CFRP、[4]CFRP二次接着接合構造、[5]複雑形状CFRP構造、を主な対象とした光ファイバライフサイクルモニタリング技術を構築し、これらを用いた構造部材の品質保証・保守技術を確立する。最終的には、これら個別要素を最適配置した低コスト・高信頼性革新CFRP構造を実証する。具体的には、これまでに構築した光ファイバひずみ計測技術の計測速度を新規成形プロセスに適用可能なレベルまで向上させ、各製造プロセスにおける材料内挙動を詳細に評価する。光ファイバを考慮した複合材料モデルによる新規成形プロセスシミュレーションおよび損傷発生・進展解析を行い、実際の試験から得られる光ファイバ応答と照らし合わせることでCFRPの品質・健全性を評価する手法を確立する。最終的に補強板構造の部分構造供試体を用いて[6]実用模擬CFRP構造、の実用環境下でのライフサイクルモニタリング実証を行う。

Current Status of Research Progress
Current Status of Research Progress

1: Research has progressed more than it was originally planned.

Reason

[1]光ファイバ援用成形中その場物性評価基盤技術: CFRPプリプレグ積層時に予め内部に埋め込まれた光ファイバセンサを用いて、現実のオートクレーブ成形中に、成形過程中の材料パラメータを測定し、成形シミュレーションコードに組み込み、任意昇温・降温プロセスにも対応できることを実証した。
[2]低圧成形CFRP:層間樹脂層を有する脱オートクレーブ(OoA)プリプレグについて、上記の成形中材料パラメータの同定に成功した。
[3]熱可塑CFRP:多点FBGセンサや分布ひずみ計測技術を駆使して、厚板CFRTPのSkin-core効果の定量的評価を行い、残留成形ひずみを予測できる成形シミュレーション技術のについての論文投稿準備を終えた。
[4]CFRP二次接着接合構造:成形圧力により接着フィルム内に生じるひずみの測定を行い、接合特性に及ぼす効果を定量化した。
[5]複雑形状CFRP構造:面外方向に45度、-45度傾いた端部距離の短い2本のFBGセンサを用いて、成形中の面外方向垂直ひずみ・せん断ひずみを同時に同定する技術を応用し、U型部材や厚さ変化部の定量的評価を行った。
[6]実用模擬CFRP構造:光ファイバ援用成形中ひずみ測定や成形品の運用時のひずみ測定における有効性の証明や問題点把握のため、実用模擬CFRP構造において多点FBGまたは分布ひずみ計測実験とモデル検証解析を進め、最終年度の適用の基盤を構築した。

Strategy for Future Research Activity

[1]光ファイバ援用成形中その場物性評価基盤技術、については、その優位性を確立するためにも、従来方法との相違や有効性の証明を更に行うこと、海外機関での実施を検討していく予定である。
[2]低圧成形CFRP、[3]熱可塑CFRP、[4]CFRP二次接着接合構造、については、今後の新規材料の開発にも資するべく、CFRP素材メーカー等との更なる討議を通して貢献する予定である。
[5]複雑形状CFRP構造、 [6]実用模擬CFRP構造、については、材料メーカー、構造設計メーカーとの綿密な情報共有が不可欠であり、更なる実用化を支える基盤学術研究としたい。

  • Research Products

    (31 results)

All 2018 2017

All Journal Article (3 results) (of which Peer Reviewed: 2 results) Presentation (27 results) (of which Int'l Joint Research: 20 results,  Invited: 8 results) Patent(Industrial Property Rights) (1 results)

  • [Journal Article] High-Performance T-Joint Using Asymmetric Stacking Sequence and Atypical Deltoid Structure2018

    • Author(s)
      S. Hisada, S. Minakuchi, K. Takagaki and N. Takeda
    • Journal Title

      SAMPE Journal

      Volume: 54 (2) Pages: 6-15

    • Peer Reviewed
  • [Journal Article] Process-Induced Strain and Distortion in Curved Composites. Part I: Development of Fiber-Optic Strain Monitoring Technique and Analytical Methods2018

    • Author(s)
      K. Takagaki, S. Minakuchi and N. Takeda
    • Journal Title

      Composites, Part A

      Volume: 103 Pages: 236-251

    • DOI

      10.1016/j.compositesa.2017.09.020

    • Peer Reviewed
  • [Journal Article] Process-Induced Strain and Distortion in Curved Composites. Part II: Parametric study and application2018

    • Author(s)
      K. Takagaki, S. Minakuchi and N. Takeda
    • Journal Title

      Composites, Part A

      Volume: 103 Pages: 219-229

    • DOI

      10.1016/j.compositesa.2017.09.019

  • [Presentation] CFRP吸脱湿挙動のライフサイクルモニタリング2018

    • Author(s)
      中村謙一, 水口周, 水谷忠均, 荻原慎二, 武田展雄
    • Organizer
      第9回日本複合材料会議(JCCM9)
  • [Presentation] 層間樹脂層がL型CFRPの残留変形に与える影響2018

    • Author(s)
      澤口慶一朗, 水口周, 武田展雄
    • Organizer
      第9回日本複合材料会議(JCCM9)
  • [Presentation] 多重板厚方向流路を用いた自己修復複合材料構造2018

    • Author(s)
      加藤佳樹, 水口周, 荻原慎二, 武田展雄
    • Organizer
      第9回日本複合材料会議(JCCM9)
  • [Presentation] 繊維強化型クラックアレスタを用いた複合材T-jointの亀裂進展抑制2018

    • Author(s)
      久田深作, 水口周, 武田展雄
    • Organizer
      第9回日本複合材料会議(JCCM9)
  • [Presentation] 繊維配向制御に基づくply dropoff部の剥離抑制2018

    • Author(s)
      水口周
    • Organizer
      第9回日本複合材料会議(JCCM9)
  • [Presentation] 分布型光ファイバセンサを用いたプリプレグ積層過程の内部ひずみモニタリング2018

    • Author(s)
      田之上航祐, 丹羽翔麻, 水口周, 武田展雄
    • Organizer
      第9回日本複合材料会議(JCCM9)
  • [Presentation] Intelligent In-situ Process Monitoring and Quality Assessment of Aerospace Composite Structures2017

    • Author(s)
      N. Takeda, S. Minakuchi
    • Organizer
      CAMX (The Composites and Advanced Materials Expo)
    • Int'l Joint Research / Invited
  • [Presentation] 航空機用複合材料の研究開発の最新動向2017

    • Author(s)
      武田展雄
    • Organizer
      第19回航空宇宙材料フォーラム
    • Invited
  • [Presentation] Optical Fiber Sensor Based Quality Assurance of Aerospace Composites2017

    • Author(s)
      N. Takeda S. Minakuchi and A. Hamamoto
    • Organizer
      15th European-Japanese Symposium on Composite Materials
    • Int'l Joint Research / Invited
  • [Presentation] Review of Aeronautical Fatigue Investigations in Japan during the Period June 2015 to May 20172017

    • Author(s)
      N. Takeda
    • Organizer
      ICAF Conference 2017, International Committee on Aeronautical Fatigue
    • Int'l Joint Research / Invited
  • [Presentation] Optical Fiber Sensor Based Life Cycle Monitoring and Quality Assessment of Carbon Fiber Reinforced Polymer Matrix Composite Structures2017

    • Author(s)
      N. Takeda and S. Minakuchi
    • Organizer
      25th Int. Conf. Optical Fiber Sensors (OFS-25)
    • Int'l Joint Research / Invited
  • [Presentation] Optical Fiber Based Intelligent Process Monitoring and Modeling of CFRP Structures2017

    • Author(s)
      N. Takeda and S. Minakuchi
    • Organizer
      Memorial Workshop on Composite Materials for Aircraft and Aero Space Engineering
    • Int'l Joint Research / Invited
  • [Presentation] Further Development of High Rate Production Innovative Aircraft CFRP and Quality Assurance Technology2017

    • Author(s)
      A. Hamamoto, S.. Minakuchi and N. Takeda
    • Organizer
      Memorial Workshop on Composite Materials for Aircraft and Aero Space Engineering
    • Int'l Joint Research / Invited
  • [Presentation] Recent Development of “Innovative Aircraft Polymer Matrix Composites (iAPMC)” Project in SIP-SM4I Japan2017

    • Author(s)
      N. Takeda
    • Organizer
      UW-TU: AOS Memorial Symposium
    • Int'l Joint Research / Invited
  • [Presentation] Intelligent In-situ Process Monitoring and Quality Assessment of Aerospace Composite Structures2017

    • Author(s)
      N. Takeda and S. Minakuchi
    • Organizer
      CAMX (The Composites and Advanced Materials Expo)
    • Int'l Joint Research
  • [Presentation] Effect of Interlaminar Toughened Layers on Chemical Cure Shrinkage and Shape Distortion of L-shaped Composites2017

    • Author(s)
      S. Minakuchi, K. Sawaguchi and N. Takeda
    • Organizer
      CAMX (The Composites and Advanced Materials Expo)
    • Int'l Joint Research
  • [Presentation] "Innovative Aircraft Polymer Matrix Composites (iAPMC)"Project in SIP-AM4I Japan2017

    • Author(s)
      A. Hamamoto and N. Takeda
    • Organizer
      15th Japan International SAMPE Symposium & Exhibition (JISSE15)
    • Int'l Joint Research
  • [Presentation] Stopping Fatigue Crack in Composite Bonded Joint Using Interlocked Fiber Feature2017

    • Author(s)
      S. Minkuchi and N. Takeda
    • Organizer
      15th European-Japanese Symposium on Composite Materials
    • Int'l Joint Research
  • [Presentation] Strength Improvement of Composite T-joint using Atypical Stacking Sequence and Deltoid Structure2017

    • Author(s)
      S. Hisada, S. Minakuchi and N. Takeda
    • Organizer
      The 11th Japan - Korea Joint Symposium on Composite Materials
    • Int'l Joint Research
  • [Presentation] Analysing the Influence of Manufacturing Cooling Rate on the Impact Response of Carbon Fibre/PolyPhenylenesulfide (CF/PPS)2017

    • Author(s)
      S. McCallum, T. Tsukada and N. Takeda
    • Organizer
      21st International Conference on Composite Materials (ICCM21)
    • Int'l Joint Research
  • [Presentation] Determining Material Property Development of CFRP During Cure Based on In-situ Measurment of Internal Strain and its Application to Arbitrary Cure Cycle Simulation2017

    • Author(s)
      S. Niwa, S. Minakuchi and N. Takeda
    • Organizer
      21st International Conference on Composite Materials (ICCM21)
    • Int'l Joint Research
  • [Presentation] Self-healing CFRP Composites Using Multiple Short-microvascular-channels in Through-thickness Direction2017

    • Author(s)
      Y. Kato, S. Minakuchi, S. Ogihara and N. Takeda
    • Organizer
      21st International Conference on Composite Materials (ICCM21)
    • Int'l Joint Research
  • [Presentation] In-situ Strain Monitoring in Prepreg Placement Process Using Distributed Optical Fiber Sensor2017

    • Author(s)
      K. Tanogami, S. Niwa, S. Minakuchi and N. Takeda
    • Organizer
      21st International Conference on Composite Materials (ICCM21)
    • Int'l Joint Research
  • [Presentation] Arresting Fatigue Crack in Composite Bonded Joint Using Interlocked Fiber Feature2017

    • Author(s)
      S. Minakuchi and N. Takeda
    • Organizer
      21st International Conference on Composite Materials (ICCM21)
    • Int'l Joint Research
  • [Presentation] Residual Deformation Reduction and Strength Improvement in Composite T-Joint using Asymmetric Laminate Designand Atypical Deltoid Structure2017

    • Author(s)
      S. Hisada, K. Takagaki, S. Minakuchi and N. Takeda
    • Organizer
      21st International Conference on Composite Materials (ICCM21)
    • Int'l Joint Research
  • [Presentation] Arresting Fatigue Crack in Composite Bonded Joint using Fiber-Reinforcement Design Feature2017

    • Author(s)
      S. Minakuchi and N. Takeda
    • Organizer
      29th ICAF Symposium
    • Int'l Joint Research
  • [Presentation] High-Functioning Composite T-Joint Using Atypical Stacking Sequence and Deltoid Structur2017

    • Author(s)
      S. Hisada, K. Takagaki, S. Minakuchi and N. Takeda
    • Organizer
      29th ICAF Symposium
    • Int'l Joint Research
  • [Patent(Industrial Property Rights)] 複合材料、積層構造体、航空機の翼及び複合材料の製造方法2017

    • Inventor(s)
      水口周、武田展雄
    • Industrial Property Rights Holder
      水口周、武田展雄
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2017-253113

URL: 

Published: 2018-12-17  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi