2016 Fiscal Year Final Research Report
Development of wettability measurement for plastic material using electrostatic method
| Project/Area Number |
26420381
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Measurement engineering
|
|---|
| Research Institution | Yamagata University |
|---|
Principal Investigator |
|
|---|
| Research Collaborator |
AOKI Takuya
|
|---|
| Project Period (FY) |
2014-04-01 – 2017-03-31
|
| Keywords | ぬれ性 / 表面改質 / 表面抵抗 / 接触角 |
|---|
| Outline of Final Research Achievements |
We proposed new method to characterize or check the wettability using the non-contact surface resistivity tester. The tester measured normalized surface potential, a measured surface potential divided by an applied surface potential due to corona discharger. The relationship between the contact angle and the normalized surface potential is measured for variously deteriorated silicon rubber samples prepared by a commercial corona treatment equipment. The results showed that the normalized surface potential was increased with decreasing contact angle and with increasing humidity. The wettability could be a function of the surface resistivity depending on the amount of deposited water vapor on the surface.
|
| Free Research Field |
静電気工学
|
