1986 Fiscal Year Final Research Report Summary
Heat Transfer Characteristics of a Low-Pressure-Loss Fluidized-Bed Heat Exchanger with Bare Tube Banks.
| Project/Area Number |
60460107
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Thermal engineering
|
|---|
| Research Institution | TOHOKU UNIVERSITY |
|---|
Principal Investigator |
AIHARA Toshio Professor, Institute of High Speed Mechanics, Tohoku University, 高速力学研究所, 教授 (90006172)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
HONGOH Mitsuo Research Associate Institute of High Speed Mechanics, Tohoku University, 高速力学研究所, 助手 (40006177)
MARUYAMA Shigenao Research Associate Institute of High Speed Mechanics, Tohoku University, 高速力学研究所, 助手 (80173962)
KAMIYAMA Shinichi Professor, Institute of High Speed Mechanics, Tohoku University, 高速力学研究所, 教授 (80006171)
OBA Risaburo Professor, Institute of High Speed Mechanics, Tohoku University, 高速力学研究所, 教授 (40006169)
|
|---|
| Project Period (FY) |
1985 – 1986
|
| Keywords | Convective Heat Transfer / Multiphase Flow / Fluidized-bed Heat Exchanger / Tube Bundle / Impinging Jet / 衝突噴流 / 圧力損失 |
|---|
| Research Abstract |
A novel low-pressure-loss fluidized-bed heat exchanger has been developed for application to air-cooled heat-exchanger units operated with low-pressure fans; this fluidized-bed was composed of a multi-slit distributor, and glass beads. The measured performance of heat-transfer and fluidization was excellent and satisfactory, though the static bed height was extremely low. In the best case, where the static bed height was 13mm and the distance between the multi-slit distributor and the tubes 10mm, the present fluidized-bed exhibited a heattransfer performance comparable to a conventional one having a perforated plate distributor and a static bed height of 150mm, while the present bed showed one fourteenth the pressure drop of the conventional one.
|
