An Integrated Power-Information Networking for the Future Mechatronics System

1989 Fiscal Year Final Research Report Summary

• Project/Area Number: 63850031
• Research Category: Grant-in-Aid for Developmental Scientific Research
• Allocation Type: Single-year Grants
• Research Field: 機械工作
• Research Institution: Tyoyhashi University of Technology
• Principal Investigator: YAMAZAKI Kazuo T.U.T., Department of Engineering, Associate Professor, 工学部, 助教授 (70135416)
• Co-Investigator(Kenkyū-buntansha): YAHATA Shinya Nippon Motorola Ltd., Semiconductor Division, Division Manager, 半導体事業部, 事業部長 ; ODAJIMA Kiyoshi Yazaki Corporation, executive director, 常務取締役
• Project Period (FY): 1988 – 1989
• Keywords: Network System / Mechatronics / Factory Automation / Smart-Power IC / Communication / 光ファイバ-

Research Abstract

In a CIM system, which integrates all necessary processes such as design, manufacturing, testing, management, etc., for manufacturing a product, the programmable devices and terminals used in the various processes should have the flexibility of connection to an information network system for higher degree of automated operation over the total factory environment. In accordance with the technological trends in this sort of system integration a standardized communication protocol called as "MAP (Manufacturing Automation Protocol)" has been proposed and is on the way for explosive dissemination. In order to fully utilize this convenient communication path for productive plant operation, intelligent communication functionality should be provided in each stand alone terminals and programmable devices. The communication functionality has been well grown up in the computer based systems and well disseminated in the office environment compared to the factory environment. On the factory floor, especially, mechatronics control systems such as CNC machine tools, robot systems and material handling and transfer systems, which can be considered as " information-power converters", should have the smart communication functions so that a safe and productive operation of an automated factory can be realized. Since the recent controllers are adopting software based power control as well as information processing with a distributed microprocessor-based control components, the valuable information concerning in-system status can be obtained in the information-power conversion process as well as in the regular information-information processing. In order to facilitate the effective utilization of the various information available in the mechatronics control. system, the concept of "In-system networking" or "small area networking" can be introduced both for power handling and information processing.
This research has been established aiming at development of necessary technologies for a small area networking system which integrates power handling and information processing for the future mechatronics systems. We introduced a concept of the network system, discussed key technologies for the system, proposed the architecture of system hardware and software and described the results obtained in the feasibility study which had been performed by prototyping the system.