Grant-in-Aid International Scientific Research
|Allocation Type||Single-year Grants|
|Section||University-to-University Cooperative Research|
|Research Institution||Daido Institute of Technology|
ONO Munenori(1994-1995) Daido Institute of Technology, Faculty of Technology, Prof., 工学部, 教授 (80087171)
戸澤 康壽(1993) 大同工業大学, 工学部, 教授 (20022965)
GOTTFRIED Be アーヘン工科大学, 金属工学部, 研究助手
ROLF Bunten RWTH Aachen, Institute of Metal Forming, Dipl.-Ing., 金属工学部, 研究助手
UDO Zitz RWTH Aachen, Institute of Metal Forming, Dipl.-Ing., 金属工学部, 研究助手
REINER Kopp RWTH Aachen, Institute of Metal Forming, Prof., 金属工学部, 教授
NISHIBORI Kenji Daido Institute of Technology, Faculty of Technology, Prof., 工学部, 教授 (50115614)
HOSINO Katsuei Daido Institute of Technology, Faculty of Technology, Prof., 工学部, 教授 (50131149)
KOMORI Kazutake Daido Institute of Technology, Faculty of Technology, Associate Prof., 工学部, 助教授 (10178379)
TOZAWA Yasuhisa Daido Institute of Technology, President Prof., 学長 (20022965)
RAINER Thoma アーヘン工科大学, 金属工学部, 研究助手
五十川 幸広 大同特殊鋼(株), 技術開発研究所, 主任研究員
小野 宗憲 大同工業大学, 工学部, 教授 (80087171)
|Project Fiscal Year
1993 – 1995
Completed(Fiscal Year 1995)
|Budget Amount *help
¥6,000,000 (Direct Cost : ¥6,000,000)
Fiscal Year 1995 : ¥2,000,000 (Direct Cost : ¥2,000,000)
Fiscal Year 1994 : ¥2,000,000 (Direct Cost : ¥2,000,000)
Fiscal Year 1993 : ¥2,000,000 (Direct Cost : ¥2,000,000)
|Keywords||Thixo-forging / Casting / forging / Hot forging / Material model / Simulation / Hot rolling / Ultrasonic motor / Robot hand / 温・熱間鍛造 / 温間鍛造 / 連続鍛造 / 半溶融|
An enormous amount of energy is consumeed in manufacturing processes of machine parts. For the purpose of saving energy in metal forming, new metal forming processes such as semi-solid stage forging (thixo-forging) and casting/forging process, the development of simulation techniques of metal forming processes and the high functional robot technology for labor saving were investigated in this research project.
A standard hydraulic forging press was modernized to fulfill demands of control quality, speed of reaction and flexibility of stroke programming for thixo-forging. And material data and boundary conditions for the FEM simulation of metal forming processes were investigated. The forgeability of cast Al-alloys and the effect of forging conditions on tensile properties of cast/forged Al-alloys were studied experimentally.
FEM simulation techniques were developed for the analysis of the transfer behavior of microscopic surface structure from the roll to the sheet and for the microscopic friction caused by geometrical phenomenons in real contact areas for upsetting tests. The material models were developed for the description of the changes of the material data, caused by dynamic recrystallization during the forming operation and the static recrystallization during the process breaks. Deformation in maltipass caliber rooling was analyzed by three-dimentional regid-plastic FEM, and temperature distribution was calculated by using a new combined method of 3-d FDM and 1-d FEM.FEM techniques were used for simulation of ductile fractue behavior in drawing and shearing.
Robot manipulator, robot arm and robot hand using ultrasonic motors were developed, and its control method and driving characteristics were investigated.