STUDIES ON BLANKING A METAL BY UNDERWATER SHOCK PRESSURE.
| Project/Area Number |
05650133
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
機械工作・生産工学
|
|---|
| Research Institution | KAGOSHIMA NATIONAL COLLEGE OF TECHNOLOGY |
|---|
Principal Investigator |
MOCHIHARA Minoru KAGOSHIMA NATIONAL COLLEGE OF TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING PROFESSOR, 機械工学科, 教授 (30044613)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
NAKIYAMA Yasuhiro KAGOSHIMA NATIONAL COLLEGE OF TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING LE, 機械工学科, 講師 (40222179)
|
|---|
| Project Period (FY) |
1993 – 1994
|
| Project Status |
Completed (Fiscal Year 1994)
|
| Budget Amount *help |
¥2,100,000 (Direct Cost: ¥2,100,000)
Fiscal Year 1994: ¥500,000 (Direct Cost: ¥500,000)
Fiscal Year 1993: ¥1,600,000 (Direct Cost: ¥1,600,000)
|
|---|
| Keywords | shearing / blanking / punching / high-energy-rate forming / numerical analysis / shearing process / underwater shock pressure / finite difference method / 数値シミュレーション / パイプ / 高速度加工 |
|---|
| Research Abstract |
In this research the following have been investigated.
1.The effect of the distance from a shock pressure source to the specimen on the accuracy of punching a hole.
2.Relations between materials and accuracy of punching a hole.
3.Applications of the results of static punching by high pressure to setting appropriate conditions for punching with underwater shock pressure.
4.Development of a computer program for numerical simulation, by which the mechanism of shearing deformation of a metal plate is analyzed.
5.Trial production of a new device to generate underwater shock pressure using the high speed forming chamber.
6.Possible size, shape and number of holes, which are punched on the wall of metal pipes.
|
Report
(3 results)
Research Products
(15 results)
